Sale




MR. JO Tecrete-EWT
₹1,220.00 – ₹6,275.00 Inclusive of all taxes
Three Component Epoxy Repair Mortar
SKU: N/A
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
Description
MR. JO Tecrete-EWT product is a three component non porous solvent free epoxy mortar designed for multipurpose concrete repair and adhesive mortar application with extended working time
- Color: Neutral
- Pot life @25°C: 110-140 mins
- Mixing Ratio: Flowable(F) 100:50:250, Tampable(T) 100:50:500, Non Sag(N) 100:50:850
- Mixture consistency: Flowable
- Coverage: Flowable(F) 1.5kg/m2/mm, Tampable(T) 1.8kg/m2/mm, Non Sag(N) 2kg/m2/mm
- Concrete plastering
- Repair mortar
- Heavy machine foundations
- Bonding mortar for blocks
Surface Preparation
- Remove all dust and debris by physical and mechanical means, prior to application of the product. surfaces should be freed from laitance and dust by sand-blasting.
- In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
- Choose MR. JO Tecrete-EWT(F) for self leveling application with smooth top finish.
- Choose MR. JO Tecrete-EWT(T) for Trowel spread application with rough finish.
- Choose MR. JO Tecrete-EWT(N) for non sag Trowel spread application on curved & vertical surfaces with rigid finish.
- Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
- Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
- Mix all the three components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
- Allow 4-5 hour for surface to dry and 24 hours to achieve strength.





