Sale

MR. JO Bondkot – LVC

MR. JO Bondkot – MVC
MR. JO Bondkot – UPS

₹986.00 – ₹17,989.00 Inclusive of all taxes

Two component, low viscosity old to new concrete epoxy bonding agent.

SKU: ADH/LVC
Clear

Description

MR. JO Bondkot – LVC is a two-part, low viscosity epoxy system. It is solvent-free and easy to use. Moreover, it is perfect for concrete bonding and structural rehabilitation. In addition, it offers strong resistance to salt water. Besides, it works well as an old to new concrete bonding agent. Therefore, it is a smart choice for tough environments.

  • Color: Pale yellow
  • Pot life @25°C: 100-120 mins
  • Mixing Ratio: 100:50 PBW
  • Mixture consistency: Medium viscosity liquid
  • Optics: Transparent/Translucent
  • Filler loading possible
  • Adhesion promoter
  • Sealer coat
  • Protective coating
  • Screed
Surface Preparation
  • The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
Application Method 
  • Use Jpoxy Part-A & Part-B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or by using brush/roller to the pretreated surfaces.
  • Allow the material to cure for at least 24 hours before putting to use.
Login to Download TDS
Q1. When should I choose MR. JO Bondkot-LVC over MR. JO Bondkot-MVC?

A1. When you need deeper penetration into porous, dusty, or uneven concrete.

Q2. Does MR. JO Bondkot-LVC offer the same strength as MR. JO Bondkot-MVC?

A2. Yes, once cured, it provides comparable bonding strength.

Q3. Can I use MR. JO Bondkot-LVC on vertical joints?

A3. It may sag — use MR. JO Bondkot-HV for such needs.

Q4. Is MR. JO Bondkot-LVC more cost-effective than MR. JO Bondkot-MVC?

A4. Pricing may be similar — but you’ll get better coverage per kg on absorbent surfaces.

Q5. Can MR. JO Bondkot-LVC be used as a primer before repair mortars?

A5. Yes, excellent for priming patch repair zones.

Q6. How much area does 1 kg cover?

A6. 4–5 m² depending on substrate texture.

Q7. Does MR. JO Bondkot-LVC cure faster or slower than MR. JO Bondkot-STD?

A7. Slower — MR. JO Bondkot-STD is designed for quick turnarounds.

Q8. Can I pre-warm MR. JO Bondkot-LVC to reduce viscosity?

A8. Yes, mildly warming (under 40°C) improves flow in cold weather.

Q9. Can MR. JO Bondkot-LVC be applied in multiple layers?

A9. Yes, but subsequent layers should be applied within 6 hours.

Q10. Is MR. JO Bondkot-LVC UV-stable?

A10. No — like all epoxies, it may yellow with UV exposure.

Q11. Does it remain tacky after cure?

A11. No. It cures to a hard, dry finish.

Q12. Is it suitable under self-leveling epoxy floors?

A12. Yes, when used as a bonding primer over rough concrete.

Q13. Can I use it for epoxy grouting?

A13. Yes, when combined with graded quartz or fillers.

Q14. Can it bond concrete to steel?

A14. Yes — prepare steel surfaces by roughening or sandblasting.

Q15. What’s the shelf life?

A15. 12 months unopened in cool, dry storage.