Sale

MR. JO Tecbond – BW

MR. JO Tecbond – CLR60
MR. JO Tecbond – VCL

₹207.00 – ₹10,944.00 Inclusive of all taxes

Two component 80 PHR bright white colored filled epoxy adhesive.

SKU: ADH/BW
Clear

Description

The Mr. JO Tecbond – BW is a two-component bright white epoxy adhesive. Also, it secures surfaces with strong and durable bonding. Its works on concrete, marble, stone, construction and engineering materials. Furthermore, its white and filled design provides a clean finish. This makes it perfect for structural and decorative uses. Moreover, it helps in repairing cracks, sealing gaps, and creates strong bonds. It is a reliable choice for tough projects.

  • Color: Bright white
  • Pot life @25°C: 55-65 mins
  • Mixing Ratio: 100:80 PBW
  • Mixture consistency: Flowable liquid
  • Optics: Opaque
  • Filling gap between bottom of commode and floor
  • Filling gap between the wash basin & wall
  • Repairing broken parts of household items
  • Repair of floor
Surface Preparation
  • The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
Application Method
  • Use Part A & Part B in ratio 100:80 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
  • The joint components should be assembled as soon as the adhesive has been applied.
  • Allow the material to cure for at least 24 hours before putting to use.
Login to Download TDS
Q1. What is MR. JO Tecbond – BW used for?

A1. MR. JO Tecbond – BW is a bright white, general-purpose epoxy adhesive designed for bonding, filling, and sealing where a clean or light-colored finish is essential. Common applications include:

  • White furniture & cabinetry
  • Modular kitchens & wardrobes
  • Appliances & electrical fittings
  • Stone, tile, or laminate joints
  • Interior decorative installations
Q2. How is MR. JO Tecbond – BW different from MR. JO Tecbond – OPK? A2.
  • Both adhesives have similar bonding strength, viscosity, and pot life.
  • The main difference is color: BW is bright white, making it ideal for aesthetic applications where grey-colored OPK would stand out.
Q3. Who should use MR. JO Tecbond – BW? A3.
  • Furniture manufacturers (especially white interiors)
  • Appliance assemblers
  • Interior fit-out contractors
  • Fabricators working with white or light-colored materials
Q4. Will the adhesive line be visible on white surfaces?

A4. No. MR. JO Tecbond-BW’s bright white finish blends well with most white laminates, panels, ceramics, and paints, resulting in clean, minimal joint lines.

Q5. What is the pot life and mixing ratio? A5.
  • Mixing ratio: 100:80 by weight (resin: hardener)
  • Pot life: ~60 minutes at 25°C
  • Cure time: Initial set in ~4 hours; full cure in 24 hours
Q6. What materials does BW bond well with?

A6. It is ideal for:

  • Metal to metal
  • Stone and ceramic
  • Wood, MDF, plywood
  • Plastics (test recommended)
  • Pre-laminated boards
Q7. Can it be painted or overcoated?

A7. Yes, though it is often left exposed due to its clean white finish. It can be painted, PU-coated, or laminated after curing.

Q8. Will the white color stay white after curing?

A8. Yes, it cures to a bright white finish. Under normal indoor conditions, it stays white. Long-term UV exposure may cause slight yellowing.

Q9. Is MR. JO Tecbond-BW water- or heat-resistant?

A9. Yes. Once cured, MR. JO Tecbond – BW is moisture-resistant and can handle temperatures up to ~70°C. Not intended for submerged use or prolonged heat exposure.

Q10. How should I store Tecbond – BW?

A10. Store in cool, dry conditions, tightly sealed. Shelf life is 12 months if unopened and properly stored.