Sale

MR. JO Tecbond – VCL

MR. JO Tecbond – BW
MR. JO Tecbond – GSE

₹202.00 – ₹12,540.00 Inclusive of all taxes

Two component 80 PHR clear flowable epoxy adhesive.

SKU: ADH/VCL
Clear

Description

Mr. JO Tecbond – VCL is a flowable, non porous, two part clear adhesive. This works well for industrial and structural applications. It works well on concrete, metal, and chemical resistant surfaces. In addition, it gives a clear transparent finish. Also, its solvent free offers smooth finish to applications requiring high clarity. As a result, it gives long-lasting results, making it great for hard tasks.

  • Color: Clear
  • Pot life @25°C: 35-50 mins
  • Mixing Ratio: 100:80PBW
  • Mixture consistency: Flowable liquid
  • Optics: Transparent
  • Wood working
  • Construction
  • Repair
Surface Preparation 
  • The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
Application Method 
  • Use Part A & Part B in ratio 100:80 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
  • The joint components should be assembled as soon as the adhesive has been applied.
  • Allow the material to cure for at least 24 hours before putting to use.
Login to Download TDS
Q1. What is MR. JO Tecbond – VCL used for?

A1. MR. JO Tecbond – VCL is a clear epoxy adhesive designed especially for:

  • Handicraft bonding
  • Transparent sealing and coating
  • Decorative joints
  • DIY and art projects It’s ideal where optical clarity and aesthetic finish are essential.
Q2. What makes MR. JO Tecbond-VCL different from other clear adhesives? A2.
  • It uses a 100:80 PBW mix ratio, unlike 100:100 systems
  • Cures to a rigid, glossy, clear coat
  • Formulated specifically for craft applications where fine detail and visual quality matter
  • Flows well but does not slump excessively, offering good surface hold
Q3. Who typically uses MR. JO Tecbond – VCL? A3.
  • Artisans and handicraft professionals
  • Decor product manufacturers
  • Jewelry repair and fabrication studios
  • DIY enthusiasts creating clear, bonded finishes
Q4. Can MR. JO Tecbond-VCL be used on functional or structural applications?

A4. VCL is best used for light-duty and aesthetic bonding. For structural or heavy-load use, MR. JO Tecbond-UP is recommended.

Q5. What is the mixing ratio and pot life? A5.
  • Mix Ratio: 100 parts resin : 80 parts hardener by weight
  • Pot Life: ~45–60 minutes at 25°C
  • Full Cure: ~24 hours
  • Initial set: 4–6 hours depending on temperature and film thickness
Q6. What substrates does MR. JO Tecbond-VCL bond with? A6.
  • Wood, MDF, stone
  • Glass, ceramic
  • Resin art elements
  • Metal and composites (non-load bearing) Surface must be clean and oil-free for best clarity and bonding.
Q7. Can MR. JO Tecbond-VCL be poured into molds or used for casting?

A7. It is primarily an adhesive, not a deep-pour resin. For casting >2–3 mm thick, MR. JO Artcast-CC33 is more suitable. For surface sealing or dome coating, VCL works well in thin layers.

Q8. How can I avoid bubbles or yellowing in the mix? A8.
  • Mix slowly and thoroughly to avoid air entrapment
  • Use in thin layers for best clarity
  • Avoid curing under direct heat or sunlight, which can accelerate yellowing
Q9. What is the cured finish like? A9.
  • Cures to a rigid, glossy, transparent surface
  • Good UV stability indoors, though prolonged sun exposure may lead to slight yellowing over time
Q10. Can the cured surface be sanded or polished?

A10. Yes. Once fully cured, the surface can be:

  • Lightly sanded for matte effects
  • Polished for added gloss
  • Painted or top-coated if needed
Q11. Is MR. JO Tecbond-VCL safe for use in decorative items or toys?

A11. Once cured, it’s non-tacky and stable, but it’s not certified food-safe or toy-grade. For items used by children or near food, proper topcoat or sealing is advised.