Sale
MR. JO Bondkot – CLR
₹898.00 – ₹16,262.00 Inclusive of all taxes
Two component 50 PHR clear epoxy system for joint and gap sealing.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
Description
MR. JO Bondkot – CLR is a clear, two-part epoxy system. It is solvent-free and easy to apply. You can use it to fill joints in marble floors. It works better than white cement. Also, it gives a neat, strong, and lasting finish. So, it is a smart choice for clean and durable flooring.
- Color: Clear
- Pot life @25°C: 20-40 mins
- Mixing Ratio: 100:50 PBW
- Mixture consistency: Low viscosity liquid
- Marble joint filling
- Optics: Transparent
- Joint filler on stone, granite and marble floors
- Concrete crack repair
- Gap filling
Surface Preparation
- The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
- Use Jpoxy Part-A & Part-B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or by using brush/roller to the pretreated surfaces.
- Allow the material to cure for at least 24 hours before putting to use.
