Product - MR. JO Tecbond-ELV

Description

Mr. JO Tecbond-ELV is a two-part low viscosity epoxy system made for electric work. First, it is great for low voltage potting, casting, and covering electronic parts. Moreover, it also serves as an adhesive for encapsulation and general purpose bonding.. Also, its clear, it is easy to use and apply. Because of this, it gives strong and reliable bond. In short, this glue is a great choice for many electrical tasks.

• Color: Clear
• Pot life @25°C: 95-100 mins
• Mixing Ratio: 100:10 PBW
• Mixture consistency: Low Viscous liquid
• Optics: Transparent
• Glass transmission temperature(Tg): 60-70°C

• Casting
• Encapsulation electronic parts
• Potting low voltage parts

• The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface

• Use Jpoxy Part-A & Part-B in ratio 100:10 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces
• The joint components should be assembled as soon as the adhesive has been applied.
• Allow the material to cure for at least 24 hours before putting to use.

A1. MR. JO Tecbond – ELV is a two-part epoxy adhesive system developed for electrical, insulation, and general assembly applications. It is ideal for:

• Potting and encapsulation
• Bonding electrical laminations and components
• General-purpose insulation tasks

A2. The mix ratio is 100:10 by weight (resin: hardener). Proper mixing is critical to achieve full strength and complete curing.

A3. Yes. ELV is functionally comparable to standard epoxy resin-hardener systems used in electrical industries, offering similar viscosity, pot life, and cure behavior. It is an economical alternative for use in motors, transformers, coil terminations, and other MRO applications.

A4.

• Electrical component manufacturers
• Motor repair and rewind shops
• Appliance and equipment OEMs
• Technicians requiring strong insulating epoxy bonds

A5.

• Pot Life: ~45–60 minutes at 25°C
• Handling Strength: ~4–6 hours
• Full Cure: ~24 hours at room temperature Mild heating can accelerate the cure process if needed.

A6. ELV bonds effectively to:

• Metal (steel, copper, aluminum)
• Plastics and composites
• Wood, ceramics, and insulation boards
• Laminations, coils, and terminal blocks

A7. Yes. ELV’s medium-low viscosity makes it suitable for:

• Shallow potting and coating
• Filling small gaps or cavities
• Encapsulating wire joints and PCB sections

A8. Due to its flowable nature, it is better suited for flat or horizontal applications. For vertical bonding, consider a higher-viscosity or thixotropic epoxy (e.g., MR. JO Tecbond-NS or X).

A9. ELV cures to a rigid, opaque to slightly translucent finish depending on the thickness and ambient conditions. Once cured, it is mechanically strong and moisture-resistant.

A10. Once fully cured:

• Resists temperatures up to ~80–90°C
• Offers good electrical insulation
• Suitable for indoor or enclosed installations

A11. Yes. After full cure, ELV becomes a rigid solid that can be sanded, machined, or top-coated as needed.

A12.

• Keep containers sealed and stored in a cool, dry place
• Avoid direct sunlight and humidity
• Shelf life: 12 months unopened