MR. JO Tecbond – CL : Premium Clear Epoxy Adhesive for Strong, Invisible Bonds
MR. JO Tecbond – CL is a two-part clear epoxy adhesive crafted for strong structural bonding with crystal-clear aesthetics. Whether you are bonding glass, acrylic, wood, stone, or metal — or need an adhesive for high-end furniture, automotive detailing, or clear handicrafts — this high-performance product delivers strength, clarity, and reliability in every drop.
Formulated with a non-sag, thick flowable texture, it is perfect for vertical joints, transparent assemblies, and critical interior details where appearance and adhesion both matter.
🔍 Key Technical Specifications
| Property | Value |
| Color | Clear White |
| Pot Life @25°C | 120–140 minutes |
| Mixing Ratio | 100:80 PBW |
| Mixture Consistency | Clear thick flowable liquid |
| Optics | Transparent |
🔧 Key Features & Benefits
✔ Crystal-Clear Bond Line – Perfect for transparent and light-colored substrates
✔ Non-Sag Consistency – Excellent for vertical surfaces and clean applications
✔ Slow Cure, High Strength – Long pot life for stress-free assembly and precise work
✔ Low Shrinkage, Solvent-Free – Maintains shape, strength, and clarity
✔ UV-Resistant & Non-Yellowing – Preserves clarity and beauty over time
✔ Excellent Electrical & Thermal Stability – Suitable for potting/encapsulation
🎯 Typical Applications
- Glass-to-glass and glass-to-metal bonding
- Jewelry and handicraft production
- Transparent wood joinery and interior furniture assembly
- Aircraft, automobile and marine part bonding
- Repair of cracked acrylic or polycarbonate displays
- LED modules and transparent potting jobs
- Decorative and structural bonding where glue lines must stay invisible
🛠 How to Use MR. JO Tecbond – CL
✅ Surface Preparation
- Clean all bonding surfaces thoroughly.
- Remove dust, oil, grease, rust, and moisture.
- Light sanding improves bond on non-glass substrates.
- Ensure surfaces are dry and slightly roughened for best grip.
⚖️ Mixing Instructions
- Mix 100 parts of resin with 80 parts of hardener by weight.
- Stir slowly to avoid entrapping air bubbles.
- Use a flat spatula or stirrer for uniform mixing.
- Use the mixture within 2–2.5 hours (pot life) for optimal results.
🖌️ Application Method
- Apply adhesive evenly to one or both surfaces.
- Align and press parts into position.
- Clamp or fix in place for at least 2–4 hours.
- Allow full curing at room temperature (24–36 hours).
- Avoid heat or moisture during curing.
🧽 Cleanup & Precautions - Use alcohol or acetone-based solvent to clean tools before cure.
- Wear gloves and work in a well-ventilated area.
- Avoid skin contact with uncured components.
- Do not mix more than can be used within pot life.
🧠 Who Should Use It?
- Interior Designers & Woodworkers
- Artisans & Fine Craftsmen
- Electronics Assemblers & Potters
- Architectural Fixture Manufacturers
- Glass Contractors & Repair Technicians
- Boat & Automotive Customizers
📦 Available Packaging
- 90 g | 900 g | 1.8 kg | 9 kg combo kits
| Use It When You Need | MR. JO Tecbond – CL Delivers |
| High-strength + clear finish | ✅ Yes |
| Long working time for careful assembly | ✅ Yes |
| Adhesive for vertical or non-drip applications | ✅ Yes |
| Multi-material bonding (glass, metal, wood) | ✅ Yes |
| Transparent bonding in high-end jobs | ✅ Yes |
Leave a Reply