Product - MR. JO Bondkot – CLR

Description

MR. JO Bondkot – CLR is a clear, two-part epoxy system. It is solvent-free and easy to apply. You can use it to fill joints in marble floors. It works better than white cement. Also, it gives a neat, strong, and lasting finish. So, it is a smart choice for clean and durable flooring.

• Color: Clear
• Pot life @25°C: 20-40 mins
• Mixing Ratio: 100:50 PBW
• Mixture consistency: Low viscosity liquid
• Marble joint filling
• Optics: Transparent

• Joint filler on stone, granite and marble floors
• Concrete crack repair
• Gap filling

• The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.

• Use Jpoxy Part-A & Part-B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or by using brush/roller to the pretreated surfaces.
• Allow the material to cure for at least 24 hours before putting to use.

A1. MR. JO Bondkot – CLR is a clear, two-part epoxy adhesive specially designed for:

• Bonding colored stones like granite, sandstone, onyx, or quartz
• Creating near-invisible joints
• Matching stone tones by adding pigments or stone powder
• Decorative repairs or artistic stonework

A2.

• CLR has a transparent clear finish, while WHT is translucent white
• CLR is better for colored or patterned stones
• WHT is ideal for white marble and light stones

A3.

• Stone and tile craftsmen
• Monument restorers
• Interior designers and fabricators
• Marble and granite workers needing aesthetic joint blending

A4. 100:50 by weight (resin : hardener). Mix thoroughly before use.

A5.

• Clear finish makes joint lines nearly invisible
• Can be customized with pigment or stone dust
• Polishes well with the host stone
• Offers high strength with clean aesthetics

A6.

• Add fine stone powder from the same material
• Use epoxy-safe pigments that match the stone hue
• Mix thoroughly to maintain optical clarity

A7. Yes. By adding stone powder or fillers, you can thicken it into a non-sag paste for joints, cracks, or vertical use.

A8. Yes. Use it neat for thin joints, or paste-form for wall joints.

A9.

• Pot life: ~45 minutes at 25°C
• Initial set: ~3–4 hours
• Full cure: ~24 hours

A10. Yes. MR. JO Bondkot – CLR can be machine polished or buffed, offering a flush, glossy finish alongside the stone.

A11. Yes. MR. JO Bondkot-CLR bonds well with stone, concrete, metal, glass, and many composites.

A12. Yes, if mixed carefully and cured at room temperature. Avoid excessive heat or overmixing, which may introduce bubbles.

A13. Like all clear epoxies, some yellowing may occur under UV exposure. Indoors or shaded areas help maintain clarity longer.

A14. Yes. You may apply clear sealers or protective polishes if needed — optional for most indoor finishes.

A15.

• Store in a cool, dry place, sealed tightly
• Avoid direct sunlight
• Shelf life: 12 months unopened