Sale

MR. JO Protectokot – vHB

MR. JO Electrokot-SP

₹3,090.00 – ₹21,242.00 Inclusive of all taxes

Chemical-resistant novolac epoxy coating for vertical surfaces.

SKU: N/A
Clear

Description

MR. JO Protectokot – vHB Two component high build novolac epoxy coating system for protective & chemical resistant coatings in industrial and construction environment for vertical applications.

  • Color: Pigmented
  • Pot life @25°C: 15-25 mins
  • Mixing Ratio: 100:20 PBW
  • Excellent Chemical resistance
  • Non dripping formula
  • Mixture consistency: Flowable liquid
  • Coverage: 4 m2/kg/coat
  • Optics: Opaque
  • Industrial equipment
  • Area prone to chemical spillage
  • Laboratories
  • Distilleries
  • Petrochemical industry
Surface Preparation
  •  The mixture should be applied on a clean and rough surface. For good results, it is required that the substrate is free from loose particles.
  • Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
Application steps
  • Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
  • Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
  • Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix using brush or roller to the pretreated surfaces.
  • Allow 4-5 hours for surface to dry and 24 hours to achieve full strength.
Login to Download TDS