Sale

Mr. JO Tecbond-ELV

Original price was: ₹1,000.00.Current price is: ₹900.00. Inclusive of all taxes

Two component 10 PHR low viscosity epoxy system for electrical potting and encapsulation.

SKU: ADH/ELV
Clear
  Ask a Question

Description

The product is a two-component low viscosity solvent free clear epoxy adhesive designed for general bonding in electrical industry.

  • Color: Clear
  • Pot life @25°C: 95-100 mins
  • Mixing Ratio: 100:10 PBW
  • Mixture consistency: Low Viscous liquid
  • Optics: Transparent
  • Glass transmission temperature(Tg): 60-70°C
  • Casting
  • Encapsulation electronic parts
  • Potting low voltage parts
Surface Preparation
  • The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface
Application Method 
  • Use Jpoxy Part-A & Part-B in ratio 100:10 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces
  • The joint components should be assembled as soon as the adhesive has been applied.
  • Allow the material to cure for at least 24 hours before putting to use.

General Inquiries

There are no inquiries yet.