Sale
Mr. JO Tecbond – IW
₹718.00 – ₹13,642.00 Inclusive of all taxes
Two component 80 PHR filled epoxy system for sealing concrete core cutting.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
Mr. Jo Tecbond IW is a high-performance, two-part adhesive. Also It is solvent-free and very durable. This adhesive bonds metal, concrete, and plastic. It resists chemicals and wear. This makes it perfect for heavy-duty jobs. it creates strong bonds and provides great protection for both industrial and home use.
- Color: Off white (Other colors available)
- Pot life @25°C: 55-70 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Flowable liquid
- Optics: Opaque
- Improved wetting ability
- Structural bonding
- Fabrication adhesive
- Industrial adhesive
- Concrete core cutting
Surface Preparation
- The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
- Use Part A & Part B in ratio 100:80 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
- The joint components should be assembled as soon as the adhesive has been applied.
- Allow the material to cure for at least 24 hours before putting to use.
General Inquiries
There are no inquiries yet.