The Opaque Epoxy Workhorse Trio by MR. JO — OPT, OPK & IW
The Opaque Epoxy Workhorse Trio by MR. JO — OPT, OPK & IW
Solving Real-World Challenges with Adhesives That Just Work
When it comes to bonding and sealing in industries like textile machinery, metal fabrication, and plumbing, manufacturers and technicians face one big challenge:
“Can we get an adhesive that’s strong, affordable, color-matched, and easy to use — even in harsh or hard-to-reach applications?”
With the MR. JO Tecbond opaque adhesive trio — OPT, OPK, and IW — the answer is a confident yes.
🧩 What Sets This Series Apart?
These adhesives are:
- Two-component systems
- 100:80 mix ratio (easy and consistent to mix)
- Solvent-free and machinable
- Thixotropic (no sag, no mess)
- Available in multiple colors – beige, grey-white, sky blue, red (custom colors available too)
- Built to withstand rough handling, vibration, and wear
Whether you’re sealing, assembling, or embedding — this trio delivers.
⚙️ Use Case 1: Textile Reed Manufacturers
Textile looms run at high speeds. The reeds inside must hold perfectly aligned wires or strips — and adhesives must:
- Set strong under tension
- Stay bonded in humid/dusty environments
- Allow machine assembly and shaping after curing
💡 Solution:
- MR JO Tecbond-OPK – the perfect balance of strength, flow, and pot life
- MR. JO Tecbond-IW – for tighter gaps, faster handling, and fine control
🚿 Use Case 2: Plumbing Leak Sealing
Concrete is cut, pipes are laid, but water finds its way in. A quick, tough fix is needed.
💡 Solution:
- MR. JO Tecbond IW – flows well into annular gaps around the pipe, cures quickly, and seals permanently
- Color-matching helps blend with walls or tile work
- No shrinkage means lasting results
🏸 Use Case 3: Badminton Racket T-Joint Fixing (Metal/Graphite)
For sports goods, especially metal badminton rackets, adhesives are used to lock the T-joint in place — a critical load-bearing part of the racket.
💡 Solution:
- Mr. JO Tecbond OPT – with higher viscosity and thixotropy
- Allows precise placement without sagging
- Cures tough and is resistant to vibration and wear
🛠️ How to Use
- Prepare surfaces – clean of dust, oil, rust
- Mix A and B in 100:80 PBW until uniform
- Apply using spatula or injection gun
- Fix components in place – allow to cure at room temperature
- Can be machined or shaped post cure
✅ Why Customers Trust These Three
- Reliable bonding, batch after batch
- Easy to mix and apply on-site or in factory
- Customized shades on request
- Cost-effective with zero compromise on performance
- Perfect for scaling production or repair tasks
🧰 Which One to Pick?
| Product | Viscosity | Best For | Specialty |
| OPT | High | Metal inserts, T-joints | High thixotropy, stays in place |
| OPK | Medium | Reeds, general assembly | Easy to use, good flow and strength |
| IW | Low | Leak sealing, pipe encasing | Flows into gaps, fast wetting |
Whether you’re a factory owner, a technician on-site, or an OEM vendor — this MR. JO Tecbond opaque trio brings versatility, reliability, and simplicity to every bonding challenge.
Ready to fix, seal, and bond better?
Leave a Reply