Sale

MR. JO Bondkot – MVC

MR. JO Tecbond – ASU
MR. JO Bondkot – LVC

₹968.00 – ₹17,723.00 Inclusive of all taxes

Two component, Medium viscosity old to new concrete epoxy bonding agent.

SKU: ADH/MVC
Clear

Description

MR. JO Bondkot – MVC is a two-part, medium viscosity epoxy system. It is solvent-free and easy to apply. Moreover, it is perfect for concrete bonding and structural repairs. In addition, it offers strong salt water resistance. Besides, it works great as an old to new concrete bonding agent. Therefore, it is ideal for tough construction needs.

  • Color: Pale yellow
  • Pot life @25°C: 120-150 mins
  • Mixing Ratio: 100:50 PBW
  • Mixture consistency: Low viscosity liquid
  • Optics: Transparent/Translucent
  • Higher filler loading possible
  • Protective Coating
  • Crack sealing
  • Old to new bonding
  • Foundation grouting
Surface Preparation
  • The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
Application Method
  • Use Jpoxy Part-A & Part-B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or by using brush/roller to the pretreated surfaces.
  • Allow the material to cure for at least 24 hours before putting to use.
Login to Download TDS
Q1. What is MR. JO BondKot – MVC designed for?

A1. For bonding old-to-new concrete, precast segment joints, and preparing epoxy repair mortars.

Q2. Where is MR. JO Bondkot-MVC most commonly used?

A2. In building retrofits, column jackets, patch repair jobs, and structural overlays.

Q3. Can MR. JO Bondkot-MVC be used in load-bearing repair?

A3. Yes, when mixed with quartz sand, it forms structural-grade mortar.

Q4. How does MR. JO Bondkot-MVC compare to MR. JO Bondkot-LVC or STD?

A4.

  • Thicker than LVC
  • Slower curing than STD
  • Offers a good balance of pot life and handling
Q5. What is the pot life and working time?

A5. ~45–60 minutes at 25°C

Q6. What is the recommended overlay time?

A6. 4–6 hours; top layers must be applied before full cure for best bonding.

Q7. How should I mix it with sand for mortar?

A7.  Use 1:3 to 1:5 epoxy-to-quartz ratio by weight, depending on consistency desired.

Q8. Can I add pigments to MR. JO Bondkot-MVC?

A8. Yes, but use epoxy-compatible pigments only.

Q9. What color is MR. JO Bondkot-MVC when cured?

A9. Light to medium amber, depending on thickness.

Q10. Can it be topcoated or sealed?

A10. Yes. Suitable for epoxy floor coats, paints, or sealers.

Q11. How long does MR. JO Bondkot-MVC take to fully cure?

A11. ~24 hours at 25°C; longer in colder weather.

Q12. Is it suitable for overhead applications?

A12. Not ideal — use MR. JO BondKot-HV for non-sag needs.

Q13. Can I use MVC in humid conditions?

A13. Surface must be dry. Use MR. JO BondKot-UPS on damp substrates.

Q14. Can it be used in slab-to-column bonding?

A14. Yes. It offers excellent strength for horizontal-vertical transitions.

Q15. Is mechanical surface prep required?

A15. Yes. Remove dust, laitance, and oil before applying.