Product - MR. JO Tecbond – CL

Description

Mr. JO Tecbond – CL is a strong, clear thick epoxy adhesive. It is used for industrial and general purposes. This flexible, two-part glue makes a tough and lasting bond. This has non-sag properties. It works well for tasks requiring high clarity, such as in cars, aircrafts, ships and bonding wood, metal, glass, stone, and plastic. Moreover, it can resist vibration, temperature changes, and cold. This makes it useful even in extreme conditions. Additionally, it is great for very low-temperature bonding. The formula is solvent free and non porous. It also protects against weather, heat, and chemicals. Furthermore, its thick and smooth texture makes it easy to apply with accuracy.

It has a 100:80 PBW mixing ratio and a 120-140 minute pot life at 25°C. This slow-setting glue gives users plenty of time to work. Additionally, its smooth texture makes mixing, measuring, and applying easy. As a result, it creates strong and long-lasting bonds for tough jobs. Whether for chemical-resistant tasks or general industrial use, Mr. JO Tecbond – CL provides great clarity, strength, and durability.

• Color: White
• Pot life @25°C: 120-140 mins
• Mixing Ratio: 100:80 PBW
• Mixture consistency: Clear think flowable liquid
• Optics: Transparent

• As a penetrating sealer to achieve high bond strength
• As dust suppressant and sealer for ware houses and factory
• As a primer before over coating with other coating systems
• As a waterproofing coating for concrete, RCC and fiber concrete

• The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.

• Use Part A & Part B in ratio 100:80 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
• The joint components should be assembled as soon as the adhesive has been applied.
• Allow the material to cure for at least 24 hours before putting to use.

A1. MR. JO Tecbond – CL is a clear, two-component epoxy adhesive specially formulated for:

• Craft and decorative applications
• Transparent or aesthetic joints in furniture and fixtures
• DIY projects and light repairs where clean bonding lines are needed Its longer pot life makes it ideal for larger assemblies or precision alignment work.

A2. It uses a 100:80 mix ratio by weight (resin:hardener). This gives it a slower, controlled reaction with lower exotherm, minimizing yellowing during cure.

A3. Here's a quick comparison:

A4. Choose CL if you:

• Need more open time for alignment or spreading
• Want lower exotherm and better optical results
• Are working with delicate or heat-sensitive substrates

• Pot Life: ~75–90 minutes at 25°C
• Initial Set: 6–7 hours
• Full Cure: ~24 hours Can be accelerated slightly with mild heat.

• Wood, MDF
• Glass and acrylic
• Ceramics and stone
• Non-load-bearing metal joints
• Craft substrates (resin, composites, etc.)

A7. Yes, it has moderate viscosity, allowing for good wetting, spreading, and leveling, especially over flat or smooth surfaces.

A8. MR. JO Tecbond-CL cures to a rigid, transparent, glossy finish — ideal for visible or decorative bonding lines.

A9. Minimal yellowing under indoor conditions. To maintain clarity:

• Avoid thick pours
• Use shallow layers
• Cure in cooler, shaded areas

A10. Yes. After curing:

• Can be sanded or buffed
• Accepts PU, lacquer, or resin topcoats
• Polishes to a gloss if desired

• Store in a cool, dry place, sealed tightly
• Avoid sunlight and moisture
• Shelf life: 12 months unopened