Sale

MR. JO Tecbond – GSB

MR. JO Tecbond – PSL
MR. JO Tecbond – LV50

₹200.00 – ₹11,381.00 Inclusive of all taxes

Two components 80 PHR solvent free general purpose epoxy adhesive

SKU: N/A
Clear

Description

MR. JO Tecbond – GSB is a two-part, solvent-free epoxy adhesive with an 80 PHR ratio. It offers strong adhesion and high durability. Also, you can use it for multi-purpose bonding in both craft and industrial work. The formula mixes easily and spreads smoothly. In addition, It cures well and works on many types of surfaces. It has no harmful solvents, so it is safer to use and better for the environment. Use it for small projects or large tasks—you will get strong and reliable results every time.

  • Cures at Room Temperature
  • Excellent Adhesive strength
  • Good mechanical properties
  • Good resistance to dynamic loading
  • Bonds a wide variety of materials in common use
  • Solvent Free
  • Sporting goods manufacturing
  • Repair & Maintenance
  • Structure & Interior
Surface Preparation
  • The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
Application Method
  • Use Part A & Part B in ratio 100:80 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
  • The joint components should be assembled as soon as the adhesive has been applied.
  • Allow the material to cure for at least 24 hours before putting to use.
Login to Download TDS
Q1. What is MR. JO Tecbond – GSB used for?

A1. MR. JO Tecbond – GSB is a low-drip epoxy adhesive, specially formulated for metal-to-metal bonding where precision and control are essential. It’s especially popular in:

  • Steel badminton racket assembly
  • Metal rod and tube fixing
  • Precision metal bonding in tools, fixtures, and sports goods
Q2. How is MR. JO Tecbond-GSB different from MR. JO Tecbond – GS? A2.
  • GSB is based on GS chemistry, offering similar bond strength and versatility
  • It has lower flow and reduced dripping, making it more suitable for vertical joints or tight bonding where adhesive must stay in place
Q3. Why is MR. JO Tecbond-GSB preferred by racket manufacturers? A3.
  • It holds firmly in narrow joints between the rod and the "T" section of the racket
  • Doesn’t run or sag, ensuring cleaner application
  • Provides strong, vibration-resistant bonding
Q4. Is this adhesive suitable for other applications beyond rackets? A4. Yes. GSB is excellent for:
  • Metal tube bonding
  • Precision assembly work
  • Automotive and fabrication where low-drip behavior is critical
Q5. What is the pot life and mixing ratio? A5.
  • Mixing Ratio: 100:80 by weight
  • Pot Life: ~50–60 minutes at 25°C
  • Handling Time: ~3–4 hours
Q6. Does MR. JO Tecbond -GSB flow or slump on vertical surfaces?

A6. GSB is designed with reduced flow characteristics, offering better hold in vertical or small cavity applications compared to MR. JO Tecbond-GS or PS.

Q7. What substrates does MR. JO Tecbond GSB bond well with? A7.
  • Steel and aluminum
  • Brass and other alloys
  • Plastics (test recommended)
  • Wood, ceramics, and some composites
Q8. What is the finish like after curing?

A8. It cures to a hard, opaque finish. Aesthetic is not the priority here — performance and dimensional control are.

Q9. Is MR. JO Tecbond-GSB resistant to vibration or impact?

A9. Yes. It forms a rigid, mechanically tough bond, well-suited for products subjected to movement, tension, or impact, such as sports equipment.

Q10. How should MR. JO Tecbond-GSB be stored?

A10. Store sealed in a cool, dry environment. Shelf life is 12 months if unopened and kept away from moisture and direct sunlight.