The Core Epoxy Adhesive Range for Every Bonding Challenge
The Core Epoxy Adhesive Range for Every Bonding Challenge
High strength. Trusted performance. Three levels of efficiency.
The MR. JO Tecbond UP/GS/PS range represents our flagship line of unfilled, solvent-free epoxy adhesives—carefully designed to meet the needs of professionals, engineers, fabricators, and artisans. Whether you’re working on structural assembly, metal bonding, woodwork, crafts, or repairs, this series gives you a smart and scalable choice.
Each variant offers high mechanical strength, chemical resistance, and thermal stability, but with distinct pot life, flow, and pricing profiles to suit your job requirements.
📊 Product Comparison Snapshot:
| Product | Position | Pot Life @25°C | Color | Mix Ratio (PBW) | Optics | Ideal For |
| MR. JO Tecbond – UP | 🥇 Premium | 80–100 min | Pale Yellow | 100:80 | Translucent/Opaque | Construction, Anchoring, Rebar, Potting |
| MR. JO Tecbond – GS | ⚙️ General Purpose | 60–70 min | Pale Yellow | 100:80 | Translucent/Clear | Automobile parts, insulation, bonding |
| MR. JO Tecbond – PS | 💸 Economy | 45–65 min | Pale Yellow | 100:80 | Translucent | Handicrafts, field repairs, budget jobs |
🔧 Common Features Across the Series:
- Solvent-Free Formulas
No shrinkage, safe indoor use, low odor - Strong & Long-Lasting Bonds
1 kg/sq. cm strength (tested Al–Al lap joint, 25 mm²)
- Multipurpose Use
Bonds concrete, steel, wood, plastic, ceramic, rubber, marble, and more - Room Temperature Curing
No heating required; 24–36 hours for full cure - Weather & Chemical Resistance
Resilient even under tough field and factory conditions
🔬 When to Choose Which?
🥇 MR. JO Tecbond – UP
Choose when:
- Long pot life is needed for large assemblies or complex bonding
- You require high clarity and reliable mechanical strength
- You’re anchoring bolts, embedding rebar, or potting electronic parts
Best for: Construction, heavy-duty bonding, rebar & metal-to-concrete applications
Noted for: Balanced flow, long open time, dependable strength
⚙️ MR. JO Tecbond – GS
Choose when:
- You want a dependable, mid-range epoxy with clear finish
- You’re bonding metal, ceramic, or plastic in production or workshop setups
Need chemical resistance and reliable adhesion
Best for: Electrical insulation, automobile components, fixtures, sports goods
Noted for: Great all-round performance with medium pot life
💸 MR. JO Tecbond – PS
Choose when:
- Speed and affordability are top priorities
- You’re doing quick repairs, field bonding, or craftwork
You need good adhesion without long working time
Best for: Handicrafts, metal-to-rubber bonding, ceramic-to-wood bonding
Noted for: Short pot life and fast handling strength
🧽 Surface Preparation & Application Steps (All Grades)
Clean the Surface:
Remove dust, oil, paint, rust, and moisture from bonding surfaces using IPA, sandpaper, or mechanical tools.
2. Mix Resin and Hardener:
Use exact PBW ratios. Stir gently for at least 2 minutes until uniform. Avoid air entrapment.
3. Apply Adhesive:
Use spatula, brush, or injection tool. Apply evenly across one or both surfaces.
4. Clamp or Press:
Align surfaces and press gently. Clamp if needed. Remove excess before curing begins.
5. Cure:
- Initial set: 3–6 hours depending on grade
- Full cure: 24–36 hours at 25°C
Post-curing at 40–50°C can improve final performance
✅ Why Choose MR. JO Tecbond UP/GS/PS?
✔ Covers entire range of bonding tasks from premium to budget
✔ Engineered for Indian working conditions
✔ Trusted by industries: construction, automotive, handicrafts, maintenance
✔ Part of the larger MR. JO Tecbond ecosystem — mix & match across needs
✔ Available in multiple pack sizes for retail, workshop, and project use
Leave a Reply