MR. JO Tecbond – CLR60 : High-Clarity, Long Pot Life Epoxy Adhesive for Strong, Invisible Bonds
MR. JO Tecbond – CLR60 is a two-component, clear epoxy adhesive offering a 60-minute pot life, making it ideal for applications requiring longer working time, precise placement, and an invisible finish. It combines excellent clarity, strong adhesion, and chemical resistance, delivering clean, professional-grade results.
This formulation is especially suited for artisans, manufacturers, and engineers who demand visual aesthetics and structural performance in one product. With its 100:100 PBW mix ratio and flowable viscosity, Mr. JO Tecbond – CLR60 is easy to mix and apply.
🔍 Technical Highlights
| Property | Value |
| Color | Clear |
| Pot Life @25°C | 55–65 minutes |
| Mixing Ratio | 100:100 PBW |
| Mixture Consistency | Clear, thick, flowable liquid |
| Optics | Transparent |
🛠 Key Benefits
✔ Longer Pot Life (60 mins) – Ample time for adjustment and large surface bonding
✔ 100:100 Mix Ratio – Simple, equal-part mixing
✔ Crystal-Clear Finish – For transparent substrates and visible joints
✔ Thick Yet Flowable – Doesn’t drip easily, suitable for vertical surfaces
✔ Solvent-Free – Non-shrinking, non-corrosive, and safe to handle
✔ High Bond Strength – Holds tight even under vibration and environmental stress
🎯 Ideal Applications
- Glass-to-glass or glass-to-metal bonding
- LED lighting fixtures and panels
- Decorative acrylic and plastic assembly
- Transparent structural adhesives in stair railings
- Jewelry making and artifact restoration
- Marine, auto, and aviation interior bonding
- Transparent display and signage
🔧 How to Use
✅ Surface Preparation
- Clean all surfaces with IPA or acetone to remove dust, oil, and moisture.
- Roughen glossy surfaces slightly for better grip.
- Make sure substrates are dry and well-fit.
⚖️ Mixing Instructions
- Mix equal parts by weight (100:100 PBW) of resin and hardener.
- Stir slowly for 2–3 minutes, scraping the sides and bottom.
- Avoid introducing air bubbles into the mixture
🖌️ Application
- Apply a thin, uniform layer to one or both surfaces.
- Position the parts and hold/clamp gently for a few hours.
- Full cure in 24 hours at room temperature or faster at 50°C.
⚠️ Safety & Cleanup
- Use gloves and eye protection.
- Work in a ventilated area.
- Wipe off excess adhesive before cure using IPA or acetone.
- Store in a cool, dry place away from sunlight.
🧠 Ideal For
- Professionals in glass, acrylic, or display manufacturing
- Homeowners doing transparent repairs
- Handicraft and jewelry makers
- Engineers needing precise yet aesthetic bond lines
- Projects needing extra working time without compromising clarity
| Feature | CLR60 |
| Pot Life | 55–65 minutes |
| Mix Ratio | 100:100 |
| Transparency | ✅ High |
| Viscosity | ✅ Thick flowable |
| Use Cases | Glass, lighting, decoration, repair |
| Comparable To | Premium clear epoxies for structural and artistic bonding |
Leave a Reply