MR. JO Tecbond – ASU : Fast, Strong, and Affordable Epoxy Adhesive for Everyday Jobs
MR. JO Tecbond – ASU is a fast-drying, two-part solvent-free epoxy adhesive engineered for multi-purpose bonding. With a balanced open time and quick surface drying, ASU is built for construction, crafts, industrial assembly, and on-site repairs. It delivers speed without sacrificing strength, making it a practical choice for professionals and artisans alike.
Formulated using a different base chemistry than the UP/GS/PS group, MR. JO Tecbond – ASU features a reddish hue, faster reaction kinetics, and budget-friendly versatility.
🧪 Technical Overview
| Property | Value |
| Color | Reddish |
| Pot Life @25°C | 55–70 mins |
| Mix Ratio | 100:80 PBW |
| Mixture Consistency | Flowable liquid |
| Optics | Translucent / Opaque |
| Adhesion | High – ideal for metal, plastic, concrete, ceramic |
| Cure Profile | Fast surface set, full strength in 24–48 hrs |
🔧 Key Features
✔ Fast Surface Drying – Ideal for time-sensitive projects
✔ Strong Initial Tack and Final Bond Strength
✔ Versatile Use – Works on metal, plastic, wood, ceramics, concrete
✔ Budget Friendly – Cost-effective alternative to high-end general-purpose adhesives
✔ Solvent-Free & Non-Shrink – Safe to use, dimensionally stable
✔ Performs on Imperfect or Underprepared Surfaces – Useful on dusty or rough substrates
🏗️ Where to Use It
- Construction Joints and Interior Assembly
- Rapid Repair and Emergency Fixes
- On-site Engineering Maintenance
- Bonding Decorative Pieces or Utility Fixtures
- Quick-Set Structural Components
- Encapsulation and Potting Tasks
🧽 Application Method – Best Practices
✅ Surface Preparation
- Remove dust, rust, oil, and moisture for best results.
- For difficult surfaces (e.g., galvanized steel or polished metal), sanding or degreasing improves adhesion.
- Unlike traditional adhesives, ASU has tolerance for less-than-ideal surfaces—making it reliable for field jobs.
⚖️ Mixing Instructions
- Combine 100 parts resin to 80 parts hardener by weight.
- Mix slowly and uniformly. Avoid whipping air into the mixture.
- Use within 55–70 minutes of mixing.
🖌️ Application
- Apply a thin, even layer on one or both surfaces.
- Clamp or press parts together for the first 30–60 minutes.
- Avoid stress/load during the first 6–8 hours.
- Full cure in 24–48 hours depending on ambient temperature.
🔍 Ideal User Profiles
- Field technicians
- Small manufacturers and contractors
- Woodworkers, metal fabricators, and DIYers
- General repair professionals
📦 Suggested Packaging & Positioning - Small Pack (50g–200g) – For quick jobs, retail use
- Bulk Pack (500g–2kg) – For industrial assembly and frequent use
- Marketed as “Quick, Economical, Reliable” bonding glue with fast return-to-service time
🛠️ When to Choose MR. JO Tecbond – ASU
- Choose ASU when:
- You need a quick return-to-service
- Working on-site with rough or unprepared surfaces
- Looking for a cost-effective, fast-drying adhesive
- You need strong bonding without extensive clamping or curing infrastructure
Leave a Reply