MR. JO Tecbond – VCL : Clear, Flowable Epoxy Adhesive — Competitive Performance for Transparent Bonding and Repairs
MR. JO Tecbond – VCL is a versatile, two-component, solvent-free clear epoxy adhesive that combines strong bonding power with a flowable consistency and excellent clarity. It is designed to meet the needs of professionals and DIY users alike looking for reliable transparent adhesion in structural, decorative, or general-purpose applications.
This system is especially suitable for woodworking, furniture assembly, staircase grill bonding, and visible repairs, where both appearance and strength matter. With a working time of 35–50 minutes and a 100:80 PBW mix ratio, MR. JO Tecbond – VCL is easy to use and delivers consistent results
🔍 Technical Highlights
| Property | Value |
| Color | Clear |
| Pot Life @25°C | 35–50 minutes |
| Mixing Ratio | 100:80 PBW |
| Mixture Consistency | Flowable liquid |
| Optics | Transparent |
🛠 Key Benefits
✔ Excellent Transparency – Seamless, clear bonds for aesthetic needs
✔ Medium Pot Life (35–50 min) – Balanced workability for precision jobs
✔ Flowable Texture – Great for fine cracks, joints, or pours in cavities
✔ 100:80 PBW Ratio – Consistent, industry-standard mix ratio
✔ Solvent-Free – Low shrinkage, safe handling, long-lasting results
✔ Multi-Surface Compatibility – Works well on wood, metal, concrete, glass, and more
✔ Competitive Alternative – Cost-effective and performance-matched with premium clear systems like Astral Bondtite Viscoclear
🎯 Ideal Applications
- Clear joint bonding in wood and glass furniture
- Construction detail adhesion (e.g., transparent grills, panels)
- Sealing of cracks or visible surface defects
- Acrylic and decorative panel attachment
- Display or signage assembly
- Light-duty structural or craft applications
🔧 How to Use
- Clear joint bonding in wood and glass furniture
- Construction detail adhesion (e.g., transparent grills, panels)
- Sealing of cracks or visible surface defects
- Acrylic and decorative panel attachment
- Display or signage assembly
- Light-duty structural or craft applications
✅ Surface Preparation
- Surfaces must be dry, clean, and free from grease or dust.
- Wipe smooth surfaces with IPA or acetone for best adhesion.
- Light sanding may improve grip on glossy substrates.
⚖️ Mixing Instructions
- Mix resin and hardener in 100:80 PBW proportion.
- Stir slowly for 2–3 minutes until fully blended.
- Avoid aeration or bubble formation during mixing
🖌️ Application
- Pour or spread onto the prepared surface.
- For bonding, align and press parts together within pot life.
- For filling/sealing, pour into cracks and allow flow by gravity or with a spatula.
- Allow to cure undisturbed for 24 hours at room temperature.
- Accelerate cure by heating to 40–50°C if needed.
⚠️ Precautions & Tips
- Always wear gloves during handling.
- Use in a well-ventilated area.
- Clean tools with acetone or IPA before the adhesive hardens.
- Do not mix more than what can be used within the pot life.
🧠 Ideal For
- Interior designers and woodworkers needing aesthetic, clean joints
- Repair professionals looking for a clear solution for visible defects
- DIYers and crafters seeking easy-to-use transparent adhesives
- Industrial users needing a cost-effective clear epoxy system
| Feature | MR. JO Tecbond – VCL |
| Transparency | ✅ High |
| Pot Life | 35–50 mins |
| Mix Ratio | 100:80 PBW |
| Viscosity | Medium-flowable |
| Application | Bonding, sealing, pouring |
| Positioning | Cost-effective alternative to premium clear systems |
Leave a Reply