Sale

Mr. JO Protectokot – CSA

Mr. JO Protectokot – CRH
Mr. JO Electrokot – HB

Original price was: ₹5,290.00.Current price is: ₹4,761.00. Inclusive of all taxes

Two component chemical resistant epoxy coating suitable for protecting surfaces from chemical, acid and solvent spillages.

SKU: PRT/CSA
Clear
  Ask a Question

Description

Two component medium viscosity Solvent free epoxy system which provide chemical resistance against fuels, solvents and high concentration alcoholic beverages.

  • Color: Pale yellow
  • Pot life @25°C: 15-20 mins
  • Mixing Ratio: 100:20 PBW
  • Resistant to solvents, chemicals and inorganic acids
  • Mixture consistency: Medium viscosity liquid
  • Coverage : 4 m2/kg/coat
  • Optics: Transparent/translucent
  • Laboratories
  • Distilleries
  • Petrochemical industry
Surface Preparation 
  • The mixture should be applied on a clean and rough surface. For good results, it is required that the substrate is free from loose particles.
  • Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
Application Method 
  • Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
  • Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
  • Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix using brush or spatula to the pretreated surfaces.
  • Allow 4-5 hours for surface to dry and 24 hours to achieve full strength.
Login to Download TDS

General Inquiries

There are no inquiries yet.