Product - MR. JO Tecbond – CLR

Description

Mr. JO Tecbond – CLR as a two component provides strong, clear, and thick epoxy adhesive. It has an 80 PHR formula that is non porous and solvent-free, which makes it safe and easy to use. This glue is great for glass bonding, packaging items, and other projects where precise and long lasting bonding is needed. It has a smooth texture that is simple to apply. It works well for joining transparent parts, making artificial jewelry, and creating artifacts. The glue is durable and gives a clear finish. Great choice for both professional tasks and creative projects.

• Color: Clear
• Pot life @25°C: 30-40 mins
• Mixing Ratio: 100:80 PBW
• Mixture consistency: Clear thick flowable liquid
• Optics: Transparent

• Bonding glass & transparent substrate
• Transparent joints
• Jewelry & Handicrafts
• Repairing

• The mixture should be applied on a clean, rough and dry surface.
• This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching.
• Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.

• Use Part A & Part B in ratio 100:80 pbw.Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
• The joint components should be assembled as soon as the adhesive has been applied.
• Allow the material to cure for at least 24 hours before putting to use.

A1. It is a clear, two-component epoxy adhesive designed for applications where visual appearance matters, such as crafts, art pieces, decorative furniture, transparent joints, and high-finish surfaces.

A2. Unlike typical epoxies that cure with a yellow or hazy finish, MR. JO Tecbond – CLR has a crystal-clear resin and hardener, curing to a fully transparent finish—ideal when you don’t want the adhesive line to be visible.

A3. It is suitable for bonding:

• Acrylic and glass panels
• Wood and veneers
• Decorative laminates
• Jewelry, craft components
• Ceramic and polished stone

A4. It is best used in non-structural or light-duty applications where aesthetic transparency is the priority.

A5. Mix Part A and Part B in a 100:80 ratio by weight. The pot life is about 45–60 minutes at room temperature.

A6. Mix the two parts slowly and gently to avoid trapping air bubbles, which can create a cloudy or white effect in the cured joint. Use a flat stirrer and mix with minimal agitation.

A7. It’s primarily formulated as a clear adhesive, not a casting resin. For deep pour or large volume castings, a specialized product like MR. JO Artcast-CC33 is recommended.

A8. CLR has a moderate flow. For vertical applications where run-off is a concern, consider using in thin layers or supported until cured.

A9. Initial set occurs in a few hours, with full cure in 24 hours under standard room temperature.

A10. Under normal indoor conditions, it maintains its optical clarity for extended periods. However, direct sunlight or UV exposure over time may cause slight yellowing.

A11. Yes. Once cured, it can be lightly sanded and polished to maintain a clean joint line or to remove surface imperfections.