Sale

MR. JO Tecrete-EWT

₹1,220.00 – ₹6,275.00 Inclusive of all taxes

Three Component Epoxy Repair Mortar

SKU: N/A
Clear

Description

MR. JO Tecrete-EWT product is a three component non porous solvent free epoxy mortar designed for multipurpose concrete repair and adhesive mortar application with extended working time

  • Color: Neutral
  • Pot life @25°C: 110-140 mins
  • Mixing Ratio: Flowable(F) 100:50:250, Tampable(T) 100:50:500, Non Sag(N) 100:50:850
  • Mixture consistency: Flowable
  • Coverage: Flowable(F) 1.5kg/m2/mm, Tampable(T) 1.8kg/m2/mm, Non Sag(N) 2kg/m2/mm
  • Concrete plastering
  • Repair mortar
  • Heavy machine foundations
  • Bonding mortar for blocks
Surface Preparation
  • Remove all dust and debris by physical and mechanical means, prior to application of the product. surfaces should be freed from laitance and dust by sand-blasting.
  • In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
Choice of variant
  • Choose MR. JO Tecrete-EWT(F) for self leveling application with smooth top finish.
  • Choose MR. JO Tecrete-EWT(T) for Trowel spread application with rough finish.
  • Choose MR. JO Tecrete-EWT(N) for non sag Trowel spread application on curved & vertical surfaces with rigid finish.
Application steps
  • Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
  • Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
  • Mix all the three components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
  • Allow 4-5 hour for surface to dry and 24 hours to achieve strength.