Product - Mr. JO Inject – LV

Description

Mr. JO Inject – LV is a two-part epoxy grout, solvent-free, with low viscosity. You can use it for general repair jobs and structural crack fixes. Additionally, it flows easily into small gaps and works well on damaged concrete. Also, it cures fast and holds strong. So, it’s a simple and smart solution for many repair needs.

• Color: Pale yellow
• Pot life @25°C: 100-120 mins
• Mixing Ratio: 100:50 PBW
• Mixture consistency: Low viscosity liquid
• Optics: Transparent / Translucent

• Minute gap filing
• Honey comb
• Structural strengthening

• The mixture should be The system should be applied on a clean, rough and dry surface. For good results, it is required to clean the area of debris, loose particles, damaged concrete and prepare the surface for the epoxy treatment.

• Fix nipples for injection grouting in the damaged portions using epoxy mortar.
• Fix the remaining gaps and holes with same mortar.
• Use Part A & Part B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes.
• Begin the injection process by slowly pumping the grout into the nipples using the injection pump. Continue injecting the grout until the cracks or voids are completely filled, and the grout begins to flow out of adjacent nipples.
• Allow the material to cure for at least 24 hours before putting to use.