Sale
MR. JO Artglue – CG50i
₹1,320.00 – ₹5,852.00 Inclusive of all taxes
Two component 2:1 fast setting clear epoxy coating
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
Description
MR. JO Artglue – CG50i is a two-part, clear epoxy coating. It has medium viscosity and gives a glossy, glass-like finish. The coating is solvent-free and easy to clean. Additionally, it is safe for contact with food and drinking water. As a result, it’s perfect for coating tables, counters, and decorative surfaces.
- Color: Clear
- Pot life @25°C: 10-25 mins
- Mixing Ratio: 2:1 PBW
- Mixture consistency: Medium viscosity liquid
- Optics: Transparent
- Clear coating
- Handicraft
- Artifacts
Surface Preparation
- Substrate surfaces should be freed from laitance and dust by sand-blasting. In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
- Use Part A & Part B in ratio 2:1 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
- The mixture should be applied as soon as the homogenous mix is achieved.
- Allow the material to cure for at least 24 hours before putting to use.
