Product - MR. JO Lami-LV

Description

MR. JO Lami-LV is a two-component epoxy with low viscosity. It is ideal for laminating metal models and electrical parts. Additionally, you can use it with carbon fiber, glass fiber, and chopped strand mat (CSM). The resin flows smoothly and bonds strongly. It also lasts a long time. Since it has no solvents, it keeps your workspace clean and safe. Overall, use it for lamination, electrical applications, or composite work.

• Color: Clear
• Pot life @25°C: 100-150mins
• Mixing Ratio: 100:10 PBW
• Mixture consistency: Low Viscous liquid
• Optics: Transparent

• Glass fiber laminates
• Lamination tools
• Composites

• Surfaces should be freed from laitance and dust by sand-blasting. In case sandblasting is not possible, thorough abrading with a hard wire brush should be preferable.
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface

• Take small quantities of laminating resin and hardener parts by weight as recommended. • Mix the two components together thoroughly for at least 2 minutes so as to achieve uniform mixing and thorough consistency of the mix. Lay the 100-650 gsm of glass fiber/carbon fiber on the surface to be covered, apply 2 or 3 coats of the mixture again. The laminating resin can be poured directly from the mixing can onto the fiberglass/carbon fiber and spread around with the paint roller/brush. • Allow it to cure for the given cure time to get the desired results. • Apply casting system