MR. JO Bondkot–MVC – For the Perfect First Bond
Medium viscosity. Long pot life. Lasting results.
🧩 Why MVC?
When you need to create a strong, lasting bond between your floor and your topping, when you want your epoxy to flow into micro-pores, and when you require an economical yet high-performance adhesion promoter — you need a primer that doesn’t just stick but seals, strengthens, and sets the stage for everything that comes next.
That’s what MR. JO Bondkot–MVC delivers.
It’s a medium viscosity, long pot life epoxy primer and binder, formulated to penetrate, bond, and prepare substrates for epoxy coatings, screeds, or structural grouts — without rush and without compromise.
👷 Who Is It For?
- Flooring contractors preparing concrete for SL floors, screeds, or underlays
- Repair engineers sealing cracks or preparing patches
- Industrial applicators using it as a sealer or screed base
- Precast teams requiring reliable bonding for wet-to-dry concrete
- Waterproofing applicators needing a strong adhesion layer on dry concrete
🛠️ What It Does Best
- Adhesion Promoter – key bonding layer for floor toppings, underlays, or overlays
- Sealer Coat – on porous or absorbent concrete before coating
- Screed Binder – mix with quartz for epoxy mortar or repair compounds
- Protective Coating – thin clear epoxy coating with excellent strength
- Crack Sealer – flows into hairline or shrinkage cracks effectively
- Old-to-new bonding agent – epoxy bridge for monolithic repair
🧪 Technical Snapshot
| Property | Value |
| Color | Pale Yellow |
| Mix Ratio (PBW) | 100:50 |
| Pot Life (@25°C) | 120–150 minutes |
| Viscosity | Medium-Low |
| Filler Loading | Moderate – ideal for light screeds |
| Optics | Transparent to translucent |
🔍 Key Strengths
✅ Excellent surface wetting
✅ Long pot life gives sufficient working time on large areas
✅ Good coverage on smooth, low-porosity concrete
✅ Compatible with pigments, fillers, and quartz
✅ Dual-use: Sealer + Screed Base + Primer
💡 Application Use Cases
- As a primer before:
- MR. JO EcoFloor-SLP1, SLP2, SLP0.5
- MR. JO EcoUnderlay-iFLO or iTMP
- MR. JO Tecseal-CRP patching or epoxy screeds
- As a binder for:
- Crack sealing mortar
- Surface repair screed with quartz
- As a sealer on:
- Ground concrete
- Prepared precast segments
🌍 On-Site Feedback
“LVC gave us a great base for our floor – no bubbles, no rework. Just mix, roll, and go.”
– Flooring contractor, Pune
“We used it as the base for an epoxy screed with quartz in a process area. Very satisfied with how easily it spread and bonded.”
– Industrial flooring specialist, Silvassa
How to Apply
- Prepare the substrate – grind, clean, and remove all dust and oil
- Mix Part A and B (100:50 PBW) thoroughly
- Use a brush or roller to apply a thin uniform coat
- If using as binder, mix with quartz sand in a 1:2–1:4 ratio
- Apply topping or second coat while tacky or within recoat window.
⛏️ Paired With
- SL systems – MR. JO EcoFloor-SLP1, SLP2
- Screeds – MR. JO EcoUnderlay-iFLO or iTMP
- Coatings – MR. JO Floorkot-HB, CR, or Protectokot range
- Pigments – Add MR. JO ArtPigment if required
🔗 Compared Within Bondkot Range
MR. JO Bondkot–MVC is the ideal first step toward a successful epoxy flooring or repair job. Whether you’re sealing the surface, building a screed, or bonding to precast or old concrete — MVC offers the flow, flexibility, and finish your work deserves.
It’s efficient, economical, and engineered to deliver — just what you’d expect from MR. JO.
Leave a Reply