Sale
Mr. JO Floorkot-HB
₹3,645.00 – ₹13,851.00 Inclusive of all taxes
Two component high build epoxy floor coating.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
Floorkot-HB is a high-build, solvent-free epoxy system. Also, it provides strong protection and great durability. Therefore, it is perfect for industrial use. The coating gives smooth and even coverage, making it ideal for tough areas like warehouses and factories.
It stands up to chemicals, wear, and damage, which helps it last longer. The formula is easy to apply, cutting down on work time. Plus, it is safer to use because it has very little smell. The thick coating gives strong and long-lasting protection.
- Color: Pigmented
- Pot life @25°C: 20-40 mins
- Mixing Ratio: 100:20 PBW
- Good mechanical properties
- Mixture consistency: Flowable liquid
- Coverage: 4 m2/kg/coat
- Optics: Opaque
- Food courts
- Restaurant
- Parking lot
Surface Preparation
- Surfaces should be freed from laitance and dust by sand-blasting. In case sand blasting is not possible, thorough abrading with a hard wire brush should be preferable.
- Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
- Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
- Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
- Mix all the two components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
- Allow 5-6 hour for surface to dry and 24 hours to achieve full strength coating.
General Inquiries
There are no inquiries yet.