Sale

JPOXY JX 7009

5,726.0013,747.00 Inclusive of all taxes

Tertiary amine accelerator (DMP 30)

SKU: JX7009
Clear

Description

JPOXY JX 7009 is a liquid that helps epoxy cure faster. It works best with polyamine hardeners. However, you can use it with other types too. It makes surfaces stronger and saves time during work. Because of this, it suits both small and large epoxy projects.

  • EEW [g/eq] : 580-635
  • Viscosity [mPa s] @ 25˚C : 150-300
  • Color [Gardner] : ≤6
  • Density @ 25˚C [g/cc] : 0.95 – 1.00
  • To increase reactivity of Anhydrides
  • Polyamides
  • Amines hardeners
  • Tertiary amine accelerator
Q1. What is JX 7009 used for?

A1. JX 7009 is a tertiary amine accelerator used to speed up the cure of epoxy systems. It is especially effective with:

  • Polyamide hardeners
  • Polyamine and aliphatic amine hardeners
  • Anhydride curing agents
Q2. How does it work?

A2. As a catalytic accelerator, it enhances the rate of epoxy-hardener crosslinking, especially under low-temperature or fast-cure conditions. It reduces gel time and improves early strength development.

Q3. How much should I add?

A3. Typical dosage:

  • 0.2% to 5% by weight of the total formulation
  • Always evaluate on a lab scale first; higher doses can reduce pot life significantly or impact color.
Q4. What benefits does JX 7009 provide?

A4. 

  • Faster cure at room or low temperature
  • Improved productivity and turnaround time
  • Early development of mechanical and adhesive properties
  • Useful in cold climates or fast-bonding applications
Q5. Is it the same as DMP-30?

A5. JX 7009 is a DMP-30 equivalent, offering similar performance in reactivity and dosage. It is used widely as a standard tertiary amine accelerator across epoxy industries.

Q6. What types of applications benefit most from JX 7009?

A6. 

  • Fast-setting adhesives
  • Epoxy flooring & grouting
  • Cold weather installations
  • Tooling and casting resins requiring quick demolding
  • Anhydride-cured electrical insulations
Q7. Will JX 7009 affect final properties?

A7. Used within optimal dosage, it does not significantly impact final strength or chemical resistance. Overdosage may increase yellowing or reduce working time.