Product - MR. JO Floor – ASL 1

Description

Mr. JO Floor-ASL 1 is a strong, three-part epoxy flooring system. First, it creates a smooth, seamless floor that is very durable. Also, it stops static electricity with electric resistance up to 10⁹ Ohms. Because it resists moisture, the floor stays clean and hygienic. Therefore, it lasts a long time and needs little maintenance. Finally, it works great for places that need safe, strong floors.

• Color: Pigmented
• Pot life @25°C: 20-40 mins
• Mixing Ratio: 100:50:75 PBW
• Electrostatic dissipating properties
• Mixture consistency: Self levelling
• Mixture consistency: Self levelling
• Thickness: 1 mm
• Coverage: 1.6 kg/m²

• Data center
• Semiconductor fabrication industry
• Military & aerospace industries
• Antistatic flooring

• Surfaces should be freed from laitance and dust by sand-blasting. In case sandblasting is not possible, thorough abrading with a hard wire brush should be preferable.
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
• Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
• An underlay is suggested if the substrate is badly damaged or is prone to high level of mechanical abrasion. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Underlays.
• Mix all the three components provided in kit thoroughly for at least 2minutes. Copper mesh is laid and then mix is directly poured and spread with the help of trowel.
• Allow 5-6 hour for surface to dry and 24 hours to achieve full strength flooring.