Sale
Mr. JO Artcoat – WF50
₹1,091.00 – ₹16,632.00 Inclusive of all taxes
Two component 2:1 clear epoxy coating for wood
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
Description
Mr. JO Artcoat – WF50 is a clear glue for wood. First, it has two parts that mix in a 2:1 ratio. Then, it makes the wood strong and smooth. Also, it is easy to clean. You can use it for furniture, art projects, and other wood work. Because it works well and is simple to use, both beginners and experts like it.
- Color: Clear
- Pot life @25°C: 20-40 mins | Mixing Ratio: 2:1 PBW
- Mixture consistency: Low viscosity liquid
- Fast Reactivity
- Optics: Transparent
- Wooden artifact
- Furniture
- Photo frame
Surface Preparation
- Substrate surfaces should be freed from laitance and dust by sand-blasting. In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
- Use Part A & Part B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces. • The mixture should be applied as soon as the homogenous mix is achieved.
- Allow the material to cure for at least 24 hours before putting to use.
