Product - MR. JO Eco Floor

Description

MR. JO Eco Floor is a three component solvent free self level Epoxy flooring system designed for use in a wide range of floorings & floor toppings in light, medium and heavy traffic environment. It provides a seamless, dense, impervious, high strength surface which is hygienic and easy to clean.

• Easy to Apply & self leveling
• Available in two options: Neutral &
• Factory pigmented
• Seamless and Impervious
• Excellent mechanical properties
• Excellent adhesion to substrate like concrete
• Durable, hygienic and attractive

• Garage
• Mechanical workshops
• Warehouses
• Parking area
• Industrial shed

• Surfaces should be freed from laitance and dust by sand-blasting. In case sand blasting is not possible, thorough abrading with a hard wire brush should be preferable.
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Repair the surface with MR. JO Tecseal - CRP if damaged. Allow 3-4 hours for surface of repaired area to dry
• Apply MR. JO Eco Primer-P50i for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry.
• An underlay is suggested if the substrate is badly damaged or is prone to high level of mechanical abrasion. Apply MR. JO Eco Underlay-IFLO and allow 4-5 hours for surface of repaired area to dry.
• Mix the binder and designed aggregate provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
• Allow 5-6 hour for surface to dry and 24 hours to achieve full strength flooring.