Sale

MR. JO Floorkot – CLR

5,187.0019,710.00 Inclusive of all taxes

Two component clear epoxy coating

SKU: FNC/CLR
Clear

Description

Mr. JO Floorkot – CLR is a two-part, solvent-free epoxy coating. It also creates a clear, high-build finish that protects your floor. as a result, This coating gives floors a unique, attractive design and extends their life. Easy to apply, also it offers lasting beauty and durability.

  • Color: Clear
  • Pot life @25°C: 25-45 mins
  • Mixing Ratio: 100:50 PBW
  • High Clarity
  • Mixture consistency: Flowable liquid
  • Coverage: 4 m2/kg/coat
  • Optics: Transparent
  • Decorative clear coat
  • 3D floors
  • Protective coating
  • Area prone to oil spillage
Surface Preparation
  • Surfaces should be freed from laitance and dust by sand-blasting. In case sandblasting is not possible, thorough abrading with a hard wire brush should be preferable.
  • Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
Application Method 
  • Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
  • Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
  • Mix all the two components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
  • Allow 5-6 hour for surface to dry and 24 hours to achieve full strength coating.
Q1. What is MR. JO Floorkot – CLR used for?

A1. Floorkot – CLR is a clear epoxy coating used for:

  • Adding a glossy finish on top of epoxy floor coatings like MR. JO Floorkot-HB or self-leveling epoxy floors
  • Acting as a dustproof sealer on bare concrete floors
  • Improving cleanability and aesthetics of industrial or commercial spaces
Q2. What type of finish does it provide?

A2. It provides a glossy, smooth, transparent finish, enhancing the depth and shine of pigmented epoxy surfaces or natural concrete.

Q3. Can it be used on colored floors?

A3. Yes — it is ideal as a final topcoat over:

Q4. Can it be used on bare concrete?

A4. Yes. It can be applied directly on prepared, dry concrete to create a dust-free, easy-to-clean surface.

Q5. Who typically uses this product?

A5.

  • Facility and maintenance teams
  • Commercial and retail outlets
  • Industrial workshop operators
  • Epoxy flooring contractors
Q6. What is the mix ratio for MR. JO Floorkot – CLR?

A6. Refer to the product label, typically a 2-component mix (e.g., 100:50 by weight or as specified).

Q7. How many coats are recommended?

A7.

  • One coat is sufficient for sealing concrete or refreshing shine
  • Two coats may be used for deeper gloss on decorative floors
Q8. What is the coverage area per kg?

A8. Approximately 4–5 m² per kg per coat, depending on the substrate's porosity.

Q9. What are the curing and recoating times?

A9.

  • Touch dry: ~6 hours
  • Recoat time: 8–24 hours
  • Full cure: 3–5 days
Q10. What tools are needed for application?

A10. Apply using a short-pile roller, squeegee, or brush for smaller areas.

Q11. Can MR. JO Floorkot – CLR be used outdoors?

A11. It’s intended for indoor or shaded areas. Prolonged UV exposure may cause yellowing.

Q12. Will it make the floor slippery?

A12. It creates a smooth glossy surface. For anti-skid safety, broadcast anti-skid aggregates into the first coat before the second.

Q13. Can I apply it over other epoxy or PU coatings?

A13. Yes — ensure previous coats are clean, dry, and lightly abraded before overcoating.

Q14. Is it chemical and abrasion resistant?

A14. Yes, it offers moderate resistance to common chemicals and foot traffic. For heavy-duty use, a thicker clear topcoat may be considered.

Q15. How should it be stored?

A15.

  • Store in cool, dry place
  • Keep sealed when not in use
  • Shelf life: 12 months if unopened