Mr. JO Floorkot – YLW
₹4,969.00 – ₹18,882.00 Inclusive of all taxes
Two component epoxy coating for yellow marking strips
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
Mr. JO Floorkot – YLW is a two-part epoxy coating. First, it is solvent-free. Next, it has a medium thickness and a bright golden yellow color. Also, it marks floors with high precision. Finally, it dries to a strong, clear finish that lasts long.
- Color: Yellow
- Pot life @25°C: 20-40 mins
- Mixing Ratio: 100:20 PBW
- Good mechanical properties
- Mixture consistency: Brush able liquid
- Coverage: 40 rmt/kg/coat for 3” wide
- Optics: Opaque
- Direction marking on concrete roads
- Work area marking in manufacturing facilities
- Vehicle parking area marking in parking lot
- Vehicle parking area marking in garage
- Surfaces should be freed from laitance and dust by sand-blasting. In case sand blasting is not possible, thorough abrading with a hard wire brush should be preferable.
- Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
- Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
- Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
- Mix all the two components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
- Allow 5-6 hour for surface to dry and 24 hours to achieve full strength coating.
A1. MR. JO Floorkot – YLW is a bright yellow epoxy coating designed specifically for:
- Marking walkways, safety zones, workstations
- Demarcating storage and loading areas
- Creating parking lines, arrows, and warning strips
- Highlighting aisles in factories and warehouses
A2. Yes, it has the same formulation and performance as Floorkot HB, but supplied in a distinctive golden yellow color used for markings and demarcation.
Q3. What surfaces can it be applied on?A3.
- Bare concrete floors
- Existing epoxy or PU floors
- Self-leveling epoxy floors
- Rough or smooth shop floors
A4. Yellow is highly visible, making it ideal for safety and attention — it stands out clearly against grey, green, or brown flooring.
Q5. Who typically uses this product?A5.
- Industrial maintenance teams
- Warehouse operators
- Manufacturing plant supervisors
- Commercial facility managers
It’s a must-have for every shopfloor maintenance store.
Q6. How is MR. JO Floorkot – YLW applied?A6.
- Mix and apply using a brush, roller, or stencil brush
- Mask off areas with tape for clean edges
- Apply in 2 coats for solid coverage
A7.
- Mix as per label (typically 2-part system)
- Coverage: ~4–5 m² per kg per coat (depending on surface)
- 2 coats recommended for solid yellow finish
A8. Yes, lightly abrade the surface first for better adhesion.
Q9. Does it require a primer?A9. For dusty or porous concrete, a primer like MR. JO Primer-MVC or LVC is recommended. On existing epoxy, it can be applied directly after surface prep.
Q10. Can it be used outdoors?A10. It's formulated for indoor and sheltered areas. For direct UV exposure, consider a topcoat for extra protection.
Q11. How long does it take to dry?A11.
- Touch dry: ~6–8 hours
- Recoat: ~8–24 hours
- Light use: ~24 hours
- Full cure: 3–5 days
A12. Yes, once fully cured, it offers excellent abrasion resistance for light-to-moderate mechanical traffic.
Q13. Can I use it with stencils for symbols or arrows?A13. Yes — works well with stencils, masking tape, and rollers for clean, durable markings.
Q14. Can I clean the markings with floor scrubbers?A14. Yes — use non-abrasive cleaning agents and soft pads for regular maintenance.
Q15. Can it be stored and reused later?A15. Once mixed, it must be used within its pot life. Unmixed components can be stored for up to 12 months in cool, dry conditions.