Product - MR. JO Eco Primer

Description

MR. JO Eco Primer is a two-part, solvent-free epoxy primer. It is flowable, non-porous, and easy to apply. Moreover, it gives strong adhesion and protection. You can use it on wet, moist, and damp surfaces. Therefore, it is a smart choice for tough site conditions.

• Good Adhesive strength
• Good flowability
• Sufficient working time
• Good mechanical properties
• Resistance to dynamic loading
• Excellent water proofing properties
• Suitable for underprepared substrate

• Sealing minute pinholes
• In between substrate & topcoat to enhance
• adhesion
• Structure strengthening

• The mixture should be applied on a clean and rough surface. For good results, it is required that the substrate is free from loose particles.
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Surfaces should be freed from laitance and dust by sand-blasting. In case sandblasting is not possible, thorough abrading with a hard wire brush should be preferable. Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
• Mix the two components together thoroughly for at least 2 minutes so as to achieve uniform mixing and thorough consistency of the mix. Apply the mix using brush or spatula to the pretreated surfaces.
• Allow 4-5 hours for surface to dry and 24 hours to achieve full strength.