Product - Mr. JO Gelkot-BLK

Description

MR. JO Gelkot-BLK is a two-part black epoxy gelcoat system. Also, It has high viscosity and it is fast curing. It is solvent-free and easy to use. You can use it for negatives, molds, and fixtures. It works well in the ceramic industry. Also, it is great for making master models, data control models, and thin castings. You mix it with 16 PHR of hardener. So, it is a smart pick for strong and clean results.

• Color: Black
• Pot life @25°C: 20-30mins
• Mixing Ratio: 100:16 PBW
• Mixture consistency: Thixotropic black paste
• Optics: Opaque

• Working model for ceramic industry
• Gelcoat
• Negative & laminating molds
• Foundry patterns

• Surfaces should be freed from laitance and dust by sand-blasting. In case sandblasting is not possible, thorough abrading with a hard wire brush should be preferable.
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Take small quantities of gel coat resin and hardener parts by weight as recommended.
• Mix the two components together thoroughly for at least 2 minutes so as to achieve uniform mixing and thorough consistency of the mix.
• Apply mold releasing agent on the surface of the mold and then apply 2 – 3 coats of the gel coat, allow it to cure.
• Apply laminating system and casting system.