MR. JO TG-3 — The Premium, Fast-Flowing Tile Grout
MR. JO TG-3 — The Premium, Fast-Flowing Tile Grout
When speed, premium finish and precision matching are essential — TG-3 gets the job done.
Hook — the tiler on a tight schedule
An interior fit-out needs showroom-quality tiled walls and floors on a tight handover schedule. The crew needs a premium grout that gives a flawless finish quickly, with perfect color control and minimal post-cleaning effort.
The problem — real constraints on time-sensitive, premium jobs
- Fast schedules require a grout that develops initial set quickly so follow-on trades can proceed.
- Premium finishes demand perfect colour fill in textured joints with no ghosting.
- Small-batch, high-precision work needs a product that behaves consistently with minimal fuss.
The solution — what TG-3 delivers
MR. JO TG-3 is the premium three-component grout with a mix ratio 200 : 80 : 720 (Part A : Part B : filler) designed for faster work cycles and top-end aesthetics. The coated, binder-locked filler ensures grout color stays put — even in textured tile recesses — and the formulation gives a smooth, premium finish with a shorter pot life for faster turnaround.
Key benefits
- Premium aesthetic finish — smooth joints, excellent colour fidelity.
- Shorter pot life — ideal when you want quicker set and faster project handover.
- Coated filler for spotless application — no stray pigment in crevices.
- Wide shade choice & kit sizes — match and mix with confidence.
- Compatible with Mr. JO ArtSparkle for decorative sparkle grout lines.
Job-ready workflow (fast & precise)
- Pre-check: make sure tiles, spacers and layout are final — TG-3 has shorter working time.
- Weigh & mix: 200 (A) : 80 (B) : 720 (filler). Mix quickly but thoroughly.
- Small, controlled batches: use batch sizes you can finish before pot life lapses.
- Apply: compact grout into joints; TG-3 flows nicely into textured joints.
- Clean: perform initial cleaning slightly earlier than you would with TG-H (follow TDS timing) — this prevents smearing.
- Cure & finish: faster return to traffic; follow sealing guidance if required.
Dos & Don’ts
Do:
- Do use TG-3 for premium, time-sensitive jobs or when follow-on trades must start fast.
- Do keep all tools and sponges ready before mixing.
- Do standardize mixing by weight for color consistency.
Don’t:
- Don’t mix oversized batches — TG-3’s pot life is shorter.
- Don’t leave work area disorganized — you must move quickly.
- Don’t compromise surface prep — premium finish starts with clean joints.
Troubleshooting
- Mix gels too quickly → batch size too large or ambient temp high — reduce batch or cool components.
- Pigment smearing after cleaning → cleaned too late; adjust wipe timing.
Slight shade variation → ensure precise weighing and consistent filler supply.
Leave a Reply