MR. JO Teckot-RTU : Ready When You Are
MR. JO Teckot-RTU : Ready When You Are
Precision-formulated, water-based epoxy waterproofing – no dilution required, no worries at site.
🧩 The Challenge at Many Sites
Waterproofing failures often stem from an unexpected source: the water added during mixing. On-site dilution with hard water, unmeasured quantities, or inconsistent mixing can compromise the final film.
Even the best epoxy systems can falter if a careless mix leads to chalky coatings, patchy curing, or poor bonding. Especially in large projects, controlling field variables becomes a challenge.
🛠️ The RTU Solution: Reliable Waterproofing, Minus the Guesswork
MR. JO Teckot-RTU eliminates the most unpredictable variable — water addition. Supplied as a ready-to-use (RTU) system in two components (resin and hardener), it is factory-optimized to give uniform film quality, excellent adhesion, and a clean, semi-gloss finish without any need for dilution.
Just mix and apply — no measuring, no mistakes.
🧑🔧 Ideal For:
- Residential and commercial waterproofing
- Concrete walls, slabs, terraces, parapets, sunken areas
- Basements, tanks, balconies, fiber cement sheets
- Sites where field quality control is difficult
Applicators who prefer ready-to-mix solutions without dilution steps
🧪 Key Features & Advantages
- Factory-controlled formulation – consistent film every time
- No dilution needed – eliminates water-quality risks
- Water-cleanable – eco-safe and easy on tools
- Breathable – prevents blistering on moist concrete
- Tintable – can be pigmented with epoxy-compatible tints
- Smooth flow – brush or roller application
- Excellent adhesion to damp, dry, or new concrete
- Low VOC, no fire hazard
- Can be overcoated with house paints
🧱 Surface Prep Recommendations
- Surface must be free from laitance, dust, oil, or loose paint
- High-pressure water blasting or wet grit blast preferred
- Optional: 15% HCl etching if other methods not feasible
- Drying not essential — can be applied on damp concrete
📦 Mixing & Application
Mix Ratio (by volume): 1:1 (Resin : Hardener)
Optional: Up to 5–10 pbw of water only if slight thinning is required (e.g., during summer or high suction substrates)
Application Method:
- Brush, roller, or conventional spray
- Ideal recoat window: 2–24 hours
- Coverage:
- 1st coat: 4–6 m²/L
- 2nd coat: 5–7 m²/L (varies with surface texture)
Usable pot life:
~45–60 minutes at 25°C
Cure Time:
- Initial set: 12–24 hours
- Full cure: 7 days
🌧️ Where It Performs Best:
- Exterior waterproofing (walls, parapets, roofs)
- Interior slabs, sunken areas, balconies
- New concrete projects where breathability is essential
Locations where hard water or quality inconsistency is a concern
🧩 Why Choose MR. JO Teckot-RTU?
- Removes guesswork from dilution
- Reliable performance across multiple job sites
- Perfect for contractors handling volume work
- No chalking, streaking, or uneven curing due to bad water
- Fast and forgiving system for real-world conditions
🟡 MR. JO Teckot-RTU vs PRO vs CLR — What’s the Difference?
| Feature | MR. JO Teckot-RTU | MR. JO Teckot-PRO | MR. JO Teckot-CLR |
| Mix Ratio (Resin:Hardener:water) |
1:1:0 by volume | 1:1:1 by volume (First coat) 1:1:0.5 by volume (Second coat) |
1:1:0 by volume |
| Water addition | Not required | Mandatory | Not required |
| Film Finish | Semi-gloss, off-white | Semi-gloss, off-white | Transparent |
| Tintable | Yes | Yes | No |
| Cost Tier | Cost-effective | Premium | Economy |
Leave a Reply