Sale
MR. JO Artcast – FS33
₹695.00 – ₹34,672.00 Inclusive of all taxes
BPA free 3:1 resin system for deep crystal clear cast up to 30mm.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
Description
MR. JO Artcast – FS33 is a two-part, BPA-free, low-viscosity epoxy casting system.Also, it is clear, solvent-free, and creates a glossy, glass-like finish. You can use it on tabletops, kitchen counters, and more. Plus, once it cures, the surface is safe for food and drinking water contact. It’s a smart choice for a clean and stylish finish.
- Color: Clear
- Pot life @25°C: 100-190 mins
- Mixing Ratio: 3:1 PBW
- Mixture consistency: Low viscosity liquid
- Optics: Transparent
- Casting up to 30mm
- Table top
- Artifacts
Surface Preparation
- Substrate surfaces should be freed from laitance and dust by sand-blasting. In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
- Use Part A & Part B in ratio 3:1 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
- The mixture should be applied as soon as the homogenous mix is achieved.
- Allow the material to cure for at least 24 hours before putting to use
