Sale
MR. JO Artglue – CG50
₹1,276.00 – ₹27,280.00 Inclusive of all taxes
Two component 2:1 clear epoxy coating.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
Description
MR. JO Artglue – CG50 is a two-part clear epoxy coating. It has medium thickness and builds up well. And the finish looks glossy and glass-like. Also, it is also easy to clean. The formula is solvent-free and cures safely. Once cured, it is hygienic and safe for food and drinking water contact. Additionally, you can mix it in a 2:1 ratio for best results. Use it for artwork, counters, or display surfaces.
- Color: Clear
- Pot life @25°C: 15-30 mins
- Mixing Ratio: 2:1 PBW
- Mixture consistency: Medium viscosity liquid
- Optics: Transparent
- Clear coating
- Handicraft
- Artifacts
Surface Preparation
- Substrate surfaces should be freed from laitance and dust by sand-blasting. In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
- Use Part A & Part B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
- The mixture should be applied as soon as the homogenous mix is achieved.
- Allow the material to cure for at least 24 hours before putting to use.
