The Timeless Classic in Self-Level Epoxy Flooring
When it comes to industrial flooring, some products earn their place not through hype—but through consistent performance, proven reliability, and a reputation-built job after job.
That’s MR. JO Floor-SL.
A tried, tested, and trusted self-leveling epoxy flooring system that continues to receive steady demand, even as newer cost-effective options emerge.
If your project demands flawless finish, smoothness, and superior aesthetics—without compromising mechanical strength—MR. JO Floor-SL is the name to remember.
🧬 What Makes Mr. JO Floor-SL Special?
✨Premium Gloss Finish
Achieve showroom-quality flooring in industrial or commercial settings.
🛡️High Hardness & Wear Resistance
Built for footfalls, forklifts, rolling loads, and real-world stress.
🎯Precise Self-Leveling Behavior
Trowel, spike roller, done! Levels beautifully with minimal touch-up.
📦Consistent Batch Quality
Trusted by applicators and flooring contractors nationwide.
📐 Thickness Options That Match Your Needs
| Product | Typical Usage | Thickness | Approx. Coverage |
| SL0.5 | Offices, corridors, light-duty zones | 0.5 mm | ~0.8 kg/m² |
| SL1 | Light machinery, pharma, ESD-safe areas | 1 mm | ~1.6 kg/m² |
| SL2 | Warehousing, automotive, industrial plants | 2 mm | ~3.2 kg/m² |
🛠️ Application Guidance
Recommended Primer:
Choose based on substrate condition:
- LVC: Smooth concrete, higher wetting
- MVC: All-purpose primer
- UPS: Damp or underprepared surfaces
Recommended Underlay (esp. for 0.5 & 1 mm): - MR. JO Underlay-STD: Standard flowable screed
- FLO Underlay: Smoother finish screed
- TMP Underlay: Tampable for coving/edge zones
- CMR Underlay: For chemical-resistant floors
🏗️ Application Sectors
Mr. JO Floor-SL has earned its stripes across diverse segments:
🧪Cleanrooms & Laboratories
🚘Auto Service Bays & Assembly Lines
🏢Corporate Offices & Corridors
🏭Factories, Workshops, and Processing Units
🛒Retail Stores & Warehouses
🧼Food & Pharma Facilities (when coated with suitable sealers)
🧹 Surface Preparation – The Key to Flawless Floors
To get that mirror-gloss epoxy look, surface prep is non-negotiable.
- Grinding or Shot Blasting to remove laitance and open pores.
- Vacuum Cleaning to eliminate dust.
- Repairing Cracks or Joints using MR. JO Tecseal CRP.
- Correct Primer to match porosity and moisture levels.
“The better the preparation, the better the performance—and the better it looks.”
⏱️ Working Times & Curing
| Stage | Typical Time @ 25°C |
| Pot Life | 60–80 min |
| Touch Dry | 12–24 hours |
| Recoat Time | 2–24 hours |
| Full Cure | 7 days |
⚠️ Pro Tips & Cautions
✅ Always mix Part A and Part B completely before adding filler.
✅ Apply only when floor temperature is above 15°C.
❌ Avoid over-thinning or overworking the epoxy during application.
⚠️ Pigment packs (MR. JO ArtPigment) must be added to Part A before mixing with Part B for best dispersion.
🎨 Custom Color Options
MR. JO Floor-SL can be pigmented to your desired shade using MR. JO ArtPigments. Neutral base version available for on-site tinting.
🧪 Product Range Summary
MR. JO Floor-SL isn’t just another self-level epoxy. It’s a legacy product that continues to set the standard.
If your priority is flawless looks, consistent performance, and long-term durability, Floor-SL delivers without compromise.
Leave a Reply