Ask Mr. Jo
Our Products
MR. JO Tekbond-LV
Packaging: 1.1 KG
Packaging : 1.1 KG
System Properties
- Color: Clear
- Pot life @25°C: 100-120 mins
- Mixing Ratio: 100:10 PBW
- Mixture consistency: Low Viscous liquid
- Dielectric strength: 15-20 kv/mm for 3mm thickness
- Thermal resistance: -25°C to 60°C
- Optics: Transparent
Applications
- Electrical bonding
- Metal to composite bonding
- Creep resist bonding
- High performance bonding
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-MV
Packaging: 1.1 KG
Packaging: 1.1 KG
System Properties
- Color: Clear
- Pot life @25°C: 95-115 mins
- Mixing Ratio: 100:10 PBW
- Mixture consistency: Medium Viscous liquid
- Optics: Transparent
Applications
- Structural adhesive
- General bonding
- Industrial adhesive
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-EMV
Packaging: 1.1 KG
Packaging: 1.1 KG
System Properties
- Color: Clear
- Pot life @25°C: 95-110 mins
- Mixing Ratio: 100:10 PBW
- Mixture consistency: Medium Viscous liquid
- Optics: Transparent
Applications
- Electrical insulation
- Electrical encapsulation
- Casting
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-ELV
Packaging: 1.1 KG
Packaging: 1.1 KG
System Properties
- Color: Clear
- Pot life @25°C: 95-100 mins
- Mixing Ratio: 100:10 PBW
- Mixture consistency: Low Viscous liquid
- Optics: Transparent
- Glass transmission temperature(Tg): 60-70°C
Applications
- Casting
- Encapsulation electronic parts
- Potting low voltage parts
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-ELAM
Packaging: 1.1 KG
Packaging: 1.1 KG
System Properties
- Color: Clear
- Pot life @25°C: 95-125 mins
- Mixing Ratio: 100:10 PBW
- Mixture consistency: Low Viscous liquid
- Optics: Transparent
- Coefficient of thermal expansion: (1/108 ) mm/°C
Applications
- General tool building
- Wet lay-up tools
- Backing structure
- Foundry patterns
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-SHV
Packaging: 1.4 KG
Packaging: 1.4 KG
System Properties
- Color: Grey
- Pot life @25°C: 20-40 mins
- Mixing Ratio: 100:40 PBW
- Mixture consistency: Thixotropic grey paste
- Optics: Opaque
- Temperature Resistance:up to 120°C
Applications
- Electrical Insulation
- Gap filling
- Adhesion that can withstand elevated temperature
- Water resistant bonding
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-SMV
Packaging: 1.4 KG
Packaging: 1.4 KG
System Properties
- Color: Ivory
- Pot life @25°C: 35-45 mins
- Mixing Ratio: 100:40 PBW
- Mixture consistency: Thixotropic ivory paste
- Optics: Opaque
- Chemical resistant
Applications
- Teflon Bonding
- Chemical resistant bonding
- Electrical adhesive
- Construction adhesive
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-X
Packaging: 1.5 KG
Packaging: 1.5 KG
System Properties
- Color: Black
- Pot life @25°C: 35-50 mins
- Mixing Ratio: 100:50 PBW
- Mixture consistency: Thixotropic black paste
- Optics: Opaque
- Damp, moist and underprepared substrate curing
Applications
- Repair, fill and seal holes, cracks and worn surfaces
- Bonding agent for pre casted concrete segment
- Concrete repairs
- Damp, moist and underprepared substrate bonding
- Bonding agent for tile & brick
How to use
-
The mixture should be applied on a clean and rough surface. For good results, it is required that the concrete surface is free from loose particles. Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
-
The joint components should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength.
MR. JO Tekbond-NS
Packaging: 2 KG | 10 KG
Packaging: 2 KG
Packaging: 10 KG
System Properties
- Color: White
- Pot life @25°C: 60-70 mins
- Mixing Ratio: 100:100 PBW
- Mixture consistency: Putty paste
- Optics: Opaque
- Non drip(up to 5mm) on overhead/vertical surface
Applications
- Structural strengthening
- Impregnation
- Fiber glass reinforcement
- Curves/ irregularities on substrate
How to use
-
Mixture should be applied on a clean, rough and dry surface. For good results, it is required that the concrete surface is clean, rough, dry and free from loose particles.
-
Mix the two components in small batches thoroughly for at least 2 minutes.
-
Apply the mix on the prepared substrate directly or using proper spatula.
-
When applying glass cloth or carbon fiber, place the fiber/cloth on the surface where putty has been applied. It is suggested to apply an over coat to impregnate the glass cloth/carbon fiber using spatula. Allow to cure for 24 hours to achieve full bond strength.
MR. JO Tekbond-BLV
Packaging: 1.1 KG
Packaging: 1.1 KG
System Properties
- Color: Clear
- Pot life @25°C: 60-70 mins
- Mixing Ratio: 100:10 PBW
- Mixture consistency: Low Viscous liquid
- Optics: Transparent
- Relatively shorter open time
Applications
- Brush making
- Paint Roller manufacturing
- Metal, plastic & ceramic bonding
- High performance bonding
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength.
MR. JO Tekbond-NSF
Packaging: 2 KG | 10 KG
Packaging: 2 KG
Packaging: 10 KG
System Properties
- Color: White
- Pot life @25°C: 45-60 mins
- Mixing Ratio: 100:100 PBW
- Mixture consistency: Putty paste
- Optics: Opaque
- Suitable for synthetic wood
- Non drip(up to 5mm) on overhead/vertical surface
Applications
- Synthetic wood to laminates
- Synthetic wood to veneer
- Bonding dissimilar materials like wood to metal, wood to concrete etc.
- Outdoor wood furnitures/fixtures
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
Apply thick layer of adhesive between the substrate and allow at least 8 hours to cure before going for further working.
MR. JO Tekbond-UP
Packaging: 1.8 KG | 9 KG
Packaging: 1.8 KG
Packaging: 9 KG
System Properties
- Color: Pale yellow (Other colors available)
- Pot life @25°C: 80-100 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Medium viscous flowable liquid
- Adhesive Strength*: >1 Kg /sq. mm (*Aluminum to Aluminum 25mm X 25mm area Lap joint)
- Optics: Translucent/Opaque
Applications
- Encapsulation/potting
- Structure & interior
- Component repair & pasting
- Bolt anchoring
- Concrete- Rebar extension
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-GS
Packaging: 1.8 KG | 9 KG
Packaging: 1.8 KG
Packaging: 9 KG
System Properties
- Color: Pale yellow
- Pot life @25°C: 60-70 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Clear thick liquid
- Optics: Clear/Translucent
Applications
- Brake lining to break shoe
- Electrical insulation
- Bonding various automobile parts
- Sports good manufacturing
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-GLS
Packaging: 1.8 KG | 9 KG
Packaging: 1.8 KG
Packaging: 9 KG
System Properties
- Color: Pale yellow
- Pot life @25°C: 60-70 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Clear Flowable liquid
- Optics: Clear/Translucent
Applications
- Battery terminal bonding
- Bonding metal body to grinding stone
- House hold repairing
- Repairing sanitaryware
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-CLR
Packaging: 1.8 KG | 9 KG
Packaging: 1.8 KG
Packaging: 9 KG
System Properties
- Color: Clear
- Pot life @25°C: 30-40 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Clear thick flowable liquid
- Optics: Transparent
Applications
- Bonding glass & transparent substrate
- Transparent joints
- Jewelry & Handicrafts
- Repairing
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-OPK
Packaging: 1.8 KG | 9 KG
Packaging: 1.8 KG
Packaging: 9 KG
System Properties
- Color: Grey (Other colors available)
- Pot life @25°C: 55-65 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Thick flowable liquid
- Optics: Opaque
Applications
- Metal to ceramic bonding
- Metal to metal bonding
- Bonding rigid plastics
- Bond almost all kind of material
- Repair & Maintenance
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-IW
Packaging: 1.8 KG | 9 KG
Packaging: 1.8 KG
Packaging: 9 KG
System Properties
- Color: Off white (Other colors available)
- Pot life @25°C: 55-70 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Flowable liquid
- Optics: Opaque
- Improved wetting ability
Applications
- Structural bonding
- Fabrication adhesive
- Industrial adhesive
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Tekbond-ASG
Packaging: 1.8 KG | 9 KG
Packaging: 1.8 KG
Packaging: 9 KG
System Properties
- Color: Yellow
- Pot life @25°C: 45-60 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Thick liquid
- Optics: Translucent/Opaque
- Fast surface drying
Applications
- Art & craft
- Household repairing
- Sports good manufacturing
- Bonds underprepared substrate
How to use
-
The mixture should be applied on a clean and rough surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength.
MR. JO Tekbond-ASU
Packaging: 1.8 KG | 9 KG
Packaging: 1.8 KG
Packaging: 9 KG
System Properties
- Color: Yellow
- Pot life @25°C: 55-70 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Flowable liquid
- Optics: Translucent/Opaque
- Fast surface drying
Applications
- Structure and interior
- Encapsulation/Potting
- Bonds underprepared substrate
How to use
-
The mixture should be applied on a clean and rough surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength.
MR. JO Bondkot-HV
Packaging: 2 KG | 10 KG
Packaging: 2 KG
Packaging: 10 KG
System Properties
- Color: Grey
- Pot life @25°C: 60-80mins
- Mixing Ratio: 100:40 PBW
- Mixture consistency: Thick floppy liquid
- Optics: Opaque
- Damp, moist and underprepared substrate curing
Applications
- Segment Bonding
- Construction Joints
- Precast Bonding
- Old to new concrete bonding
How to use
-
The mixture should be applied on a clean and rough surface. For good results, it is required that the concrete surface is free from loose particles. Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
-
The joint components should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength.
MR. JO Bondkot-MVC
Packaging: 7.5 KG
Packaging: 7.5 KG
System Properties
- Color: Pale yellow
- Pot life @25°C: 120-150 mins
- Mixing Ratio: 100:50 PBW
- Mixture consistency: Low viscosity liquid
- Optics: Transparent/Translucent
- Higher filler loading possible
Applications
- Protective Coating
- Crack sealing
- Old to new bonding
- Foundation grouting
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Bondkot-LVC
Packaging: 7.5 KG
Packaging: 7.5 KG
System Properties
- Color: Pale yellow
- Pot life @25°C: 100-120 mins
- Mixing Ratio: 100:50 PBW
- Mixture consistency: Medium viscosity liquid
- Optics: Transparent/Translucent
- Filler loading possible
Applications
- Adhesion promoter
- Sealer coat
- Protective coating
- Screed
How to use
-
The mixture should be applied on a clean, rough and dry surface. Traces of grease or oil should be removed from the surface before applying the adhesive.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly by spatula or pour and spread with spatula on the surfaces.
-
The components to be bonded should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength
MR. JO Bondkot-UPS
Packaging: 7.5 KG
Packaging: 7.5 KG
System Properties
- Color: Pale yellow
- Pot life @25°C: 80-100 mins
- Mixing Ratio: 100:50 PBW
- Mixture consistency: Medium viscosity liquid
- Optics: Transparent/Translucent
- Damp, moist and underprepared substrate curing
Applications
- Precast bonding
- Sealer coat
- Protective coating
- Old to new bonding
How to use
-
The mixture should be applied on a clean and rough surface. For good results, it is required that the concrete surface is free from loose particles. Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
-
Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
-
The joint components should be assembled as soon as the adhesive has been applied. Allow to cure for 24 hours to achieve full bond strength.