Our Products
MR. JO Tg-3
System Properties
- Color: Colored (Shade Card)
- Pot life @25°C: 60-90mins
- Mixing Ratio: 100:40:360 PBW
- Mixture consistency: Flowable paste
- Optics: Opaque
Applications
- Kitchen
- Office
- Bathroom
- Swimming pool
- Commercial/residential building
How to use
-
Remove all dust and debris from the joints and clean the surface by physical and mechanical means, prior to application of the grout.
-
Mix all three components until the mixture is uniformly spread and a smooth consistency is achieved.
-
Mix the contents in the bucket until all parts are uniformly mixed, until smooth creamy consistency.
-
Pour the mixed grout on to the working area and compact the grout using a hard rubber grout float in to the tile joints.
-
Remove all excess material from the tile surface using the rubber grout float.
-
Within 20-30 min of application, clean the excess of epoxy grout lying on the tiles.
-
Using a damp scrubber rub in circular motions on the floor to emulsify the grout residue and clean off the emulsified epoxy/water residue using a fine sponge. Clean all haze from the surface within 45 minutes.
-
Allow the tile grout to cure before putting the area to use.
MR. JO Tg-H
System Properties
- Color: Colored (Shade Card)
- Pot life @25°C: 60-95mins
- Mixing Ratio: 100:50:350 PBW
- Mixture consistency: Flowable paste
- Optics: Opaque
Applications
- Kitchen
- Office
- Bathroom
- Swimming pool
- Commercial/residential building
How to use
-
Remove all dust and debris from the joints and clean the surface by physical and mechanical means, prior to application of the grout.
-
Mix all three components until the mixture is uniformly spread and a smooth consistency is achieved.
-
Mix the contents in the bucket until all parts are uniformly mixed, until smooth creamy consistency.
-
Pour the mixed grout on to the working area and compact the grout using a hard rubber grout float in to the tile joints.
-
Remove all excess material from the tile surface using the rubber grout float.
-
Within 20-30 min of application, clean the excess of epoxy grout lying on the tiles.
-
Using a damp scrubber rub in circular motions on the floor to emulsify the grout residue and clean off the emulsified epoxy/water residue using a fine sponge. Clean all haze from the surface within 45 minutes.
-
Allow the tile grout to cure before putting the area to use.