Our Products
MR. JO Tekkot-PRO
System Properties
- Color: Bright White
- Pot life @25°C: 45-60mins
- Mixing Ratio: 150:100 PBW
- Mixture consistency: Fluffy flowable liquid
- Optics: Opaque
Applications
- To hold rising dampness
- Low water vapors transmission coating in building and construction industries
- As a damp proof membrane to prevent water seepage
- As a waterproofing membrane in water tanks
How to use
-
Concrete surfaces should be freed from laitance and dust by sand-blasting. In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
-
Mix the components thoroughly for at least 2 minutes.
-
Paintbrush or roller can be deployed for obtaining the desired finish.
MR. JO Tekkot-RTU
System Properties
- Color: White
- Pot life @25°C: 45-60mins
- Mixing Ratio: 150:100 PBW
- Mixture consistency: Brush able liquid
- Optics: Opaque
Applications
- Internal damp wall treatment
- Primer for painting internal and external walls
- Toilet, kitchen walls and lift pit
- Waterproofing for RCC water tanks
How to use
-
Concrete surfaces should be freed from laitance and dust by sand-blasting. In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
-
Mix the components thoroughly for at least 2 minutes.
-
Paintbrush or roller can be deployed for obtaining the desired finish.
MR. JO Tekkot-CLR
System Properties
- Color: White
- Pot life @25°C: 45-60mins
- Mixing Ratio: 100:100 PBW
- Mixture consistency: Brush able liquid
- Optics: Transparent/Translucent
Applications
- As a penetrating sealer to achieve high bond strength
- As dust suppressant and sealer for ware houses and factory
- As a primer before over coating with other coating systems
- As a waterproofing coating for concrete, RCC and fiber concrete
How to use
-
Concrete surfaces should be freed from laitance and dust by sand-blasting. In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
-
Mix the components thoroughly for at least 2 minutes.
-
Paintbrush or roller can be deployed for obtaining the desired finish.